Наукова електронна бібліотека
періодичних видань НАН України

Перегляд Физическая инженерия поверхности за назвою

Репозиторій DSpace/Manakin

Перегляд Физическая инженерия поверхности за назвою

Сортувати за: Порядок: Результатів:

  • Properties of hybrid TiN/Al₂O₃ coatings using electron beam melting 
    Kylyshkanov, M.K. (Физическая инженерия поверхности, 2007)
    New experimental results on studies of the structure, element and phase composition of hybrid coatings deposited on a substrate of stainless steel AISI 321 are presented using combined application of several methods ...
  • Properties of hybrid TiN/Al₂O₃ coatings using electron beam melting 
    Kylyshkanov, M.K. (Физическая инженерия поверхности, 2007)
    New experimental results on studies of the structure, element and phase composition of hybrid coatings deposited on a substrate of stainless steel AISI 321 are presented using combined application of several methods of ...
  • Purification of hafnium from oxygen and nitrogen 
    Pylypenko, M.M.; Drobyshevskaya, A.A. (Физическая инженерия поверхности, 2013)
    Data on the influence content of interstitial impurities on the mechanical properties of hafnium are presented in this work. Investigations the purification of hafnium from oxygen at added of aluminum on the melting ...
  • Research of a vacuum diffusion boron silicification process for constructional materials 
    Zmij, V.I.; Rudenkiy, S.G. (Физическая инженерия поверхности, 2013)
    In this work process of vacuum diffusion boron silicification of materials in sodium chloride vapour were researched. Gaseous medium composition was found by using the thermodynamic calculations of chemical reactions ...
  • Room-temperature ultraviolet laser emission from ZnO hexagonal microprisms and nanowires 
    Kapustianyk, V.; Turko, B.; Rudyk, Y.; Tsybulskyi, V.; Rudyk, V.; Vaskiv, A. (Физическая инженерия поверхности, 2015)
    We report the observation of optically pumped laser generation in ZnO microprisms and nanowires at room temperature. The ZnO microprisms were grown on the single crystal (100) silicon substrates by a solid-vapor-phase ...
  • Silicide coatings structure optimization based on multiscale approach 
    Lytovchenko, S.V.; Beresnev, V.M.; Chyshkala, V.A.; Dmytrenko, A.Ye.; Nyemchenko, U.S.; Burkovska, V.V. (Физическая инженерия поверхности, 2013)
    This paper is an attempt to apply the multi-scale approach to the study of silicide coatings on molybdenum. Macro- and microstructure of silicide coatings largely determines mechanical and corrosion properties of ...
  • Simulation of the front and rear side illumination of the CdS/CIGS thin film solar cell 
    Pogrebnyak, A.D.; Rasheed, L.S.; Allohaibee, A.K.; Muhammed, A.K. (Физическая инженерия поверхности, 2011)
    In this study the effect of the rear side illumination on the CdS/CIGS thin film solar cell has been studied. The simulation program SCAPS-1D was used in this study. This program was developed for the simulation properties ...
  • Simulation oh the ignition of a low pressure rf capacitive discharge 
    Lisovskiy, V.A.; Booth, J.-P. (Физическая инженерия поверхности, 2003)
  • Structural, optical, and electrical properties of ZnO: al prepared by CVD 
    Pogrebnyak, A.D.; Jamil, N.Y.; Muhammed, A.K.M. (Физическая инженерия поверхности, 2011)
    In this paper we will prepared thin films from transparent conductive oxide(TCO) ZnO pure, and doped for various concentration of aluminum (4,8%) using technique chemical vapor deposition (CVD) at different substrates ...
  • Structural transformation in C/Si multilayer after annealing 
    Zhuravel, I.O.; Bugayev, Ye.A.; Konotopsky, L.E.; Zubarev, E.M.; Sevryukova, V.A.; Kondratenko, V.V. (Физическая инженерия поверхности, 2012)
    Amorphous C/Si multilayers were prepared by DC magnetron sputtering technique and investigated by transmission electron microscopy and low-angle x-ray diffraction methods after annealing at 650 and 950 °C. The amorphous ...
  • Study of structure and physicochemical and mechanical properties in low-carbon steel after cyclic loading 
    Gorbachyov, L.A.; Pogrebnjak, A.D. (2009)
    It has been determined by Auger-analysis method, roentgenofluorescence method, and the diffraction analysis that dark spots which appear in the examined steel under cyclic loading are new phases.
  • Supramolecular assemblies of configuration inorganic semiconductor/oligomer. 
    Grygorchak, I.I.; Matulka, D.V.; Ivashchyshyn, F.O.; Zaichenko, O.S.; Mitina, N.Ye.; Moskvin, M.M. (Физическая инженерия поверхности, 2012)
    The possibility of formation of such supramolecular complexes as inorganic semiconductor/oligomer with use of intercalation technologies is presented in this work. Lamellar semiconductors gallium selenide and indium ...
  • Surface cyclotron x-modes propagating along a boundary of uniform plasma 
    Girka, V.A.; Puzyrkov, S.Yu. (Физическая инженерия поверхности, 2007)
    Propagation of surface cyclotron X - modes (SCXM) at the second harmonics of electron and ion cyclotron frequencies along interface of uniform semi-bounded plasma is under the consideration. It is proved both analytically ...
  • The electrophysical and optical properties of gadolinium monoantimonide thin films 
    Jabua, Z.; Kupreishvili, I.; Gigineishvili, A.; Iluridze, G.; Minashvili, T. (Физическая инженерия поверхности, 2012)
    Within a wide temperature interval 90 – 700 K the main the dependence of electro-physical parameters of GdSb films (specific resistance, Hall constant and thermo-electromotive force) on temperature have been measured. ...
  • The injection photo diode on the basis of nSi-nCdS-n⁺CdS heterostructures 
    Sapaev, I.B. (Физическая инженерия поверхности, 2013)
    It is shown that the nSi-nCdS-n⁺CdS heterostructures in operative (carrying) direction of current, while being exposed to low intensity radiation, operate as injection photodiodes. Their current sensitivity is Sλ ≈ ...
  • The interaction of Na atoms with the molecular surfaces H₂O and CH₃OH: the role of delocalized Na3s electrons 
    Borodin, A.; Hofft, O.; Kahnert, U.; Kempter, V.; Allouche, A. (Физическая инженерия поверхности, 2003)
    The interaction of Na atoms with H₂O and CH₃OH films is studied with metastable impact electron spectroscopy (MIES) under UHV conditions. The films were grown at 90 (+/ – 10) K on tungsten substrates, and exposed to Na. ...
  • The mechanism of current transport in the structure Al-p-CdTe-Mo with different thickness of the base 
    Mirsagatov, Sh.A.; Uteniyazov, A.K. (Физическая инженерия поверхности, 2015)
    In this paper the mechanism of current’s transport in the structure Al-p-CdTe-Mo is studied, when the thickness of the base w ≤ 10 μm. The results of study of current-voltage characteristics of the structure Al-p-Cd-Te-Mo ...
  • The temperature dependence of the band GAPSi 
    Guliamov, G.; Erkaboev, U.I.; Sharibaev, N.Y. (Физическая инженерия поверхности, 2013)
    With the help of mathematical modeling of the thermal broadening of the energy levels studied the temperature dependence of the band gap semiconductors. In view of the temperature dependence of the effective mass of the ...
  • Use of the determined properties of a roughness of a surface in measurement of a geometrical form of object 
    Dzubenko, M.I.; Kolpakov, S.N.; Popov, I.V.; Pryyomko, A.A. (Физическая инженерия поверхности, 2013)
    Classification of surfaces as roughness is carried out. The roughness can have the determined, stochastic or chaotic character, depending on a method of their forming. In the work the problem of finding of normal vector ...

Пошук


Розширений пошук

Перегляд

Мій обліковий запис