Constitutive Behavior of 4343/4A60 Aluminum Alloy at Multi-Pass Hot Deformation

Constitutive Behavior of 4343/4A60 Aluminum Alloy at Multi-Pass Hot Deformation

Tang, C. ; Zhou, Y. ; Weng, H. ; Guo, X.F. ; Xu, Q.P.

Інші назви: Разупрочнение и механические свойства алюминиевого сплава 4343/4А60 при многопрохдной горячей прокатке

Тема: Научно-технический раздел

УДК: 539.4

URI: http://dspace.nbuv.gov.ua/handle/123456789/173587

Посилання: Constitutive Behavior of 4343/4A60 Aluminum Alloy at Multi-Pass Hot Deformation / C. Tang, Y. Zhou, H. Weng, X.F. Guo, Q.P. Xu // Проблемы прочности. — 2017. — № 1. — С. 95-104. — Бібліогр.: 18 назв. — англ.

Підтримка: This research was supported by the International Science and Technology Cooperation Project (2013DFB50170) and the National 863 Project (2013AA031301).

Дата: 2017

Завантажень: 352

Constitutive Behavior of 4343/4A60 Aluminum Alloy at Multi-Pass Hot Deformation

Анотація:

Hot roll bonding of 4343/4A60 aluminum alloy has been performed in the Gleeble-3500 thermal simulator. The bonding process constitutive behavior has been analyzed. The results show that the peak flow stress decreases with the increase of the deformation temperature and the decrease of strain rates. An Arrhenius-type constitutive equation is used to describe the constitutive behavior of the hot rolled 4343/4A60 aluminum alloy with the thermal deformation activation energy Q of 118.48 kJ/mol. 4A60 aluminum alloy microstructure is studied using the optical microscope to investigate the dynamic recrystallization. It is revealed that with the temperature between 573 and 623 K the dynamic recovery has an effect on modeling the microstructure evolution of 4A60 aluminum alloy. It has been also concluded that the dynamic recovery is the sole softening mechanism of 4343/4A60 composite.

Показати повний запис статті