Modified Norris–Landzberg Model and Optimum Design of Temperature Cycling ALT

Modified Norris–Landzberg Model and Optimum Design of Temperature Cycling ALT

Sun, F.Q. ; Liu, J.C. ; Cao, Z.Q. ; Li, X.Y. ; Jiang, T.M.

Інші назви: Модифицированная модель Норриса-Ландцберга и оптимальный метод расчета режимов ускоренных испытаний на долговечность в условиях циклирования температуры

Тема: Научно-технический раздел

УДК: 539.4

URI: http://dspace.nbuv.gov.ua/handle/123456789/173429

Посилання: Modified Norris–Landzberg Model and Optimum Design of Temperature Cycling ALT / F.Q. Sun, J.C. Liu, Z.Q. Cao, X.Y. Li, T.M. Jiang // Проблемы прочности. — 2016. — № 1. — С. 154-165. — Бібліогр.: 16 назв. — англ.

Підтримка: This study was supported by the National Natural Science Foundation of China (No. 61104182).

Дата: 2016

Завантажень: 782

Modified Norris–Landzberg Model and Optimum Design of Temperature Cycling ALT

Анотація:

Accelerated life testing (ALT) is an effective way to assess the lifetime of a product. Due to the complex nature of its testing profile, it is difficult to carry out temperature cycling ALT. This paper establishes a modified Norris–Landzberg model as acceleration model, and proposes the optimum design method of temperature cycling ALT. First, the FEA method is used to study the influence of temperature cycling profile parameters on the thermal fatigue life of 63Sn–37Pb solder joints. Then, a modified Norris–Landzberg model is proposed by introducing ramp time and dwell time with an added weight value. Finally, the temperature cycling ALT is regarded as a special multi-stress ALT to study its optimum design method. The uniform design theory is used to determine the combined mode. The optimum model is established with the objective of minimizing the asymptotic variance of the estimation of median lifetime under normal use conditions, and the simulation example shows the workability of the proposed method.

Показати повний запис статті