Наукова електронна бібліотека
періодичних видань НАН України
періодичних видань НАН України
Peculiarities of obtaining diamond-(Fe-Cu-Ni-Sn) composite materials by hot pressing
Репозиторій DSpace/Manakin
JavaScript is disabled for your browser. Some features of this site may not work without it.
Peculiarities of obtaining diamond-(Fe-Cu-Ni-Sn) composite materials by hot pressing
Тема:
Characterization and properties
Інший ID:
DOI: https://doi.org/10.15407/fm24.01.031
Посилання:
Peculiarities of obtaining diamond-(Fe-Cu-Ni-Sn) composite materials by hot pressing / E. Gevorkyan, V. Mechnik, N. Bondarenko, R. Vovk, S. Lytovchenko, V. Chishkala, O. Melnik // Functional Materials. — 2017. — Т. 24, № 1. — С. 31-45. — Бібліогр.: 27 назв. — англ.
Дата:
2017
Переглядів:
1012
Завантажень:
710
Анотація:
Structure formation processes were investigated depending on sintering temperature in hot pressing of diamond-(Fe-Cu-Ni-Sn) composition and their impact on physical and mechanical properties of obtained composite materials. Properties of the composites, such as hardness, wear resistance and strength limits in compressing and folding were studied. It was found that the composite obtained by hot pressing in the temperature range of 20-1000°C and under a pressure of 0.5-40 MPa had the best properties. The results were compared with mechanical properties of composites obtained earlier by sintering in molds placed in a furnace with hydrogen environment at 800°C during 1 h with subsequent hot repressing under different pressures.
