Показати простий запис статті
dc.contributor.author |
Zorenko, A.V. |
|
dc.contributor.author |
Kolesnik, N.V. |
|
dc.contributor.author |
Kritskaya, T.V. |
|
dc.contributor.author |
Kudryk, Ya.Ya. |
|
dc.contributor.author |
Marunenko, Yu.V. |
|
dc.contributor.author |
Ryzhanovich, L.P. |
|
dc.date.accessioned |
2017-05-26T06:24:37Z |
|
dc.date.available |
2017-05-26T06:24:37Z |
|
dc.date.issued |
2013 |
|
dc.identifier.citation |
A subharmonic mixer for the 220–325 GHz frequency range / A.V. Zorenko, N.V. Kolesnik, T.V. Kritskaya, Ya.Ya. Kudryk, Yu.V. Marunenko, L.P. Ryzhanovich // Semiconductor Physics Quantum Electronics & Optoelectronics. — 2013. — Т. 16, № 1. — С. 84-85. — Бібліогр.: 3 назв. — англ. |
uk_UA |
dc.identifier.issn |
1560-8034 |
|
dc.identifier.other |
PACS 07.57.Hm, 85.30.Hi |
|
dc.identifier.uri |
http://dspace.nbuv.gov.ua/handle/123456789/117669 |
|
dc.description.abstract |
We have made a subharmonic mixer (SHM) for the 220–325 GHz frequency
range with conversion losses lower than 30 dB at the intermediate frequency 3 GHz. The
subharmonic mixer design was based on a GaAs mixer Schottky barrier diode with beam leads on a quartz 25-μm thick microwave board. The microwave board was placed in a
package with a waveguide channel of local oscillator input (cross-sectional area
1.2×2.4 mm) and waveguide channel of signal input (cross-sectional area 0.4×0.8 mm²
). The IF signal goes out through a subminiature A-connector, wave impedance of which is 50 Ohm. |
uk_UA |
dc.language.iso |
en |
uk_UA |
dc.publisher |
Інститут фізики напівпровідників імені В.Є. Лашкарьова НАН України |
uk_UA |
dc.relation.ispartof |
Semiconductor Physics Quantum Electronics & Optoelectronics |
|
dc.title |
A subharmonic mixer for the 220–325 GHz frequency range |
uk_UA |
dc.type |
Article |
uk_UA |
dc.status |
published earlier |
uk_UA |
Файли у цій статті
Ця стаття з'являється у наступних колекціях
Показати простий запис статті