Перегляд за автором "Tereshin, V.I."

Сортувати за: Порядок: Результатів:

  • Application of pulsed plasma streams for materials alloying and coatings modification 
    Byrka, O.V.; Bandura, A.N.; Chebotarev, V.V.; Garkusha, I.E.; Langner, J.; Sadowski, M.J.; Tereshin, V.I. (Вопросы атомной науки и техники, 2002)
    Results of pulsed plasma streams processing of material surfaces with previously deposited FeB and TiAlN coatings are presented. Under the plasma treatment intensive mixing the materials of coating with the material of ...
  • Characteristics of the plasma created by ECR plasma source for thin films deposition 
    Fedorchenko, V.D.; Byrka, O.V.; Chebotarev, V.V.; Garkusha, I.E.; Tereshin, V.I. (Вопросы атомной науки и техники, 2005)
    The construction of planar ECR plasma source with multipolar magnetic field is described and the distribution of plasma parameters is measured. Plasma density and electron temperature at the distance 2,5 cm from the magnet ...
  • Comparable analysis of shielding layer parameters for different target materials under the plasma stream exposure 
    Tsarenko, A.V.; Trubchaninov, S.A.; Marchenko, A.K.; Chebotarev, V.V.; Staltsov, V.V.; Tereshin, V.I.; Garkusha, I.E.; Makhlaj, V.A.; Solyakov, D.G.; Landman, I.S. (Вопросы атомной науки и техники, 2005)
    Numerous experiments on the plasma-wall interaction problem have been performed with the powerful quasistationary plasma accelerator (QSPA) K-50 device during last decades. These investigations were performed with different ...
  • Compression zone formation in magnetoplasma compressor operating with heavy gases 
    Marchenko, A.K.; Chebotarev, V.V.; Ladygina, M.S.; Garkusha, I.E.; Petrov, Yu.V.; Solyakov, D.G.; Staltsov, V.V,; Tereshin, V.I.; Hassanein, A. (2010)
    Present work is devoted to experimental investigations of the plasma compression zone dynamics and its influence on radiation characteristics. The construction of magneto-plasma compressor (MPC) of compact geometry with ...
  • Corrosion resistance of Nd-Fe-B magnets with PVD protecting coatings modified by pulsed plasma treatment 
    Bovda, O.M.; Bovda, V.O.; Chebotarev, V.V.; Fedorchenko, V.D.; Garkusha, I.E.; Onischenko, L.V.; Sakhnenko, M.D.; Tereshin, V.I.; Tortika, O.S.; Ved, M.V. (Functional Materials, 2008)
    The combination of PVD and pulsed plasma treatment has been applied to Nd-Fe-B based magnets to provide enhanced corrosion resistance. The corrosion behavior of plasma treated Nd-Fe-B sintered magnets with Fe₈₀B₂₀ film in ...
  • Data acquisition system for “Uragan-2M“ 
    Gubarev, S.P.; Ermakov, E.B.; Opaleva, G.P.; Taran, V.S.; Tereshin, V.I.; Zolototrubova, M.I. (Вопросы атомной науки и техники, 2008)
    The work is focused on the data acquisition system for collecting of basic parameters of plasma in thermonuclear installation “Uragan-2M” in real time experiment. The “Uragan-2M” thermonuclear installation is electro-technical ...
  • Deposition of refractory metal films with planar plasma ECR source 
    Fedorchenko, V.D.; Chebotarev, V.V.; Medvedev, A.V.; Tereshin, V.I. (Вопросы атомной науки и техники, 2007)
    The condition of the deposition of refractory metal and alloy films such as W, Mo, Ti, Ta, Cr, Ni, Fe₈₀B₂₀ with using ECR plasma source at the different magnitudes of bias voltage on targets and substrates were investigated. ...
  • Dynamics of nitrogen and xenon plasma streams generated by MPC device 
    Chebotarev, V.V.; Garkusha, I.E.; Ladygina, M.S.; Marchenko, A.K.; Petrov, Yu.V.; Solyakov, D.G.; Tsarenko, A.V.; Tereshin, V.I.; Trubchaninov, S.A.; Yelisyeyev, D.V.; Hassanein, A. (Вопросы атомной науки и техники, 2007)
    Magnetoplasma compressor (MPC) of compact geometry is developed for generation of dense plasma streams of different working gases. Discharge characteristics and parameters of the plasma streams, generated by MPC in different ...
  • Erosion, permeation and outgassing performances of tin coating under/after hydrogen plasma iffadiation 
    Glazunov, G.P.; Volkov, E.D.; Veremeyenko, V.P.; Kosik, N.A.; Kutsyn, Al.A.; Langner, J.; Langner, E.; Mironov, Yu.K.; Nazarov, N.I.; Piekoszewski, J.; Sadowski, M.; Stanislawski, J.; Tereshin, V.I. (Вопросы атомной науки и техники, 2000)
    An erosion behavior of TiN-coated stainless-steel (SS) surfaces was investigated during biased-limiter experiments within the Uragan-3M torsatron and during simulation experiments, which were performed with plasma-accelerator ...
  • Experimental studies of ion emission from RPI-IBIS facility and modeling of ion motions 
    Malinowski, K.; Czaus, K.; Sadowski, M.J.; Skladnik-Sadowska, E.; Garkusha, I.E.; Tereshin, V.I. (2010)
    The paper presents the recent measurements of ion beams emitted from an RPI-IBIS plasma injector and some preliminary results of the theoretical modeling. The RPI-IBIS facility was equipped with coaxial electrodes made of ...
  • Experimental study of plasma-surface interaction and material damage relevant to ITER type i ELMs 
    Makhlaj, V. A.; Bandura, A.N.; Byrka, O.V.; Chebotarev, V.V.; Garkusha, I.E.; Garkusha, V.V.; Kulik, N.V.; Landman, I.; Lebedev, S.I.; Neklyudov, I.M.; Staltsov, V.V.; Tereshin, V.I. (Вопросы атомной науки и техники, 2006)
    The paper presents experimental investigations of main features of plasma-surface interaction and energy transfer to the material surface in dependence on plasma heat loads. The experiments were performed with QSPA ...
  • Exposures of EU W-CFC combined targets with QSPA Kh-50 plasma streams simulating ITER ELMs 
    Makhlaj, V. A.; Garkusha, I.E.; Linke, J.; Pintsuk, G.; Tereshin, V.I.; Bandura, A.N.; Chebotarev, V.V.; Staltsov, V.V. (Вопросы атомной науки и техники, 2009)
    Repeated load tests of special combined W-CFC samples were performed with QSPA plasma streams either resulting in strong melting of W surface layer or below the melting, but above the cracking threshold. Experiments show ...
  • First results of the renewed Uragan-2M torsatron 
    Beletskii, A.A.; Berezhnyj, V.L.; Burchenko, P.Ya.; Chechkin, V.V.; Chernyshenko, V.Ya.; Grigor’eva, L.I.; Gubarev, S.P.; Konovalov, V.G.; Kulaga, A.E.; Kurilo, D.V.; Lesnyakov, G.G.; Losin, A.V.; Maznichenko, S.M.; Mironov, Yu.K.; Moiseenko, V.E.; Ozherel’ev, F.I.; Opaleva, G.P.; Pashnev, V.K.; Pavlichenko, O.S.; Prokopenko, A.V.; Romanov, V.S.; Sergeev, Yu.F.; Skibenko, A.I.; Shapoval, A.N.; Shtan, A.F.; Shvets, O.M.; Solodovchenko, S.I.; Sorokovoy, Ye.L.; Taran, V.S.; Tarasov, I.K.; Tereshin, V.I.; Tsybenko, S.A.; Voitsenya, V.S.; Volkov, E.D.; Zolototrubova, M.I. (Вопросы атомной науки и техники, 2008)
    The results of experimental investigation on the vacuum magnetic surfaces in the l=2 torsatron with an additional toroidal field Uragan-2M at wide varying operation parameters are presented. Also the first results on the ...
  • First tests of the biased movable B4C-limiter in the Uragan-2M torsatron under RF and UHF wall conditioning 
    Glazunov, G.P.; Baron, D.I.; Bondarenko, M.N.; Burchenko, P.Ya.; Chechkin, V.V.; Chernyshenko, V.Ya.; Grigor’eva, L.I.; Konovalov, V.G.; Konotopskiy, A.L.; Kotenko, V.G.; Lozin, A.V.; Maznichenko, S.M.; Moiseenko, V.E.; Pashnev, V.K.; Ponomarenko, N.P.; Solodovchenko, S.I.; Sorokovoy, Ye.L.; Shapoval, A.V.; Tereshin, V.I.; Voitsenya, V.S. (2010)
    The work describes the design of a multifunctional B4C-limiter, and reports preliminary results from experimental study of the limiter operated at steady-state and pulsed RF discharge cleaning regimes in the Uragan-2M torsatron.
  • HIgh heat flux plasma testing of ITER divertor materials under ELM relevant conditions in QSPA Kh-50 
    Makhlaj, V.A.; Garkusha, I.E.; Aksenov, N.N.; Kulik, N.V.; Landman, I.S.; Linke, J.; Medvedev, A.V.; Malykhin, S.V.; Chebotarev, V.V.; Pugachev, A.T.; Tereshin, V.I. (2010)
    Performed studies of plasma-surface interaction include measurements of plasma energy deposited to the material surface and determination of tungsten cracking threshold during repetitive ITER ELM-like plasma exposures in ...
  • Influence of hydrogen and helium plasma streams exposures on modification of tungsten structure under powerful transient loads 
    Makhlaj, V.A.; Garkusha, I.E.; Byrka, O.V.; Chrebotarev, V.V.; Landman, I.S.; Lebedev, S.I.; Malykhin, S.V.; Pugachev, A.T.; Shevchuk, P.B.; Tereshin, V.I. (Вопросы атомной науки и техники, 2011)
    Influence of plasma exposures on tungsten behavior was studied in QSPA Kh-50 facility and pulsed plasma gun PPA. Plasma loads were chosen either below the melting threshold or resulting in pronounced melting. Evolution ...
  • Influence of multipolar magnetic field geometry of ECR planar plasma source on plasma parameters 
    Fedorchenko, V.D.; Chebotarev, V.V.; Garkusha, I.E.; Medvedev, A.V.; Tereshin, V.I.; Shevchuk, B.A. (Вопросы атомной науки и техники, 2008)
    The plasma parameters and its homogeneity were measured in ECR planar plasma source with multipolar magnetic field, which is created by three parallel magnetic bars of 12 cm in length consisted of set of the permanent ...
  • Influence of plasma stream parameters in pulsed plasma gun on modification processes in exposed structural materials 
    Byrka, O.V.; Bandura, A.N.; Chebotarev, V.V.; Garkusha, I.E.; Garkusha, V.V.; Makhlaj, V.A.; Tereshin, V.I. (Вопросы атомной науки и техники, 2011)
    This paper is focused on investigation of helium, nitrogen and krypton plasma streams generated by pulsed plasma gun (PPA). The main objection of this study is adjustment of plasma treatment regimes for different materials ...
  • Influence of plasma treatment on erosion haracteristics and structure of reversible hydrogen getters 
    Borisko, V.N.; Bobkov, V.V.; Chebotarev, V.V.; Garkusha, I.E.; Lototsky, M.V.; Poltavtsev, N.S.; Rudaya, I.A.; Shmal’ko, Yu.F.; Starovojtov, R.I.; Tereshin, V.I.; Byrka, O.V. (Вопросы атомной науки и техники, 2000)
  • Influence of pulsed plasma streams processing on wear behavior of steels in different friction conditions 
    Bandura, A.N.; Bovda, A.M.; Byrka, O.V.; Chebotarev, V.V.; Garkusha, I.E.; Tereshin, V.I.; Tortika, A.S. (Вопросы атомной науки и техники, 2000)
    Pulsed plasma streams processing was applied for surface modification of industrial steel samples. Different types of wear tests (pin-on-disk, flat-on-flat, abrasive, cavitation) were carried out for samples irradiated by ...