Показати простий запис статті
dc.contributor.author |
Bandura, A.N. |
|
dc.contributor.author |
Bovda, A.M. |
|
dc.contributor.author |
Byrka, O.V. |
|
dc.contributor.author |
Chebotarev, V.V. |
|
dc.contributor.author |
Garkusha, I.E. |
|
dc.contributor.author |
Tereshin, V.I. |
|
dc.contributor.author |
Tortika, A.S. |
|
dc.date.accessioned |
2015-05-29T09:02:43Z |
|
dc.date.available |
2015-05-29T09:02:43Z |
|
dc.date.issued |
2000 |
|
dc.identifier.citation |
Influence of pulsed plasma streams processing on wear behavior of steels in different friction conditions / A.N. Bandura, A.M. Bovda, O.V. Byrka, V.V. Chebotarev, I.E. Garkusha, V.I. Tereshin, A.S. Tortika // Вопросы атомной науки и техники. — 2000. — № 3. — С. 147-149. — Бібліогр.: 4 назв. — англ. |
uk_UA |
dc.identifier.issn |
1562-6016 |
|
dc.identifier.uri |
http://dspace.nbuv.gov.ua/handle/123456789/82405 |
|
dc.description.abstract |
Pulsed plasma streams processing was applied for surface modification of industrial steel samples. Different types of wear tests (pin-on-disk, flat-on-flat, abrasive, cavitation) were carried out for samples irradiated by pulsed nitrogen plasma streams. There was achieved essential decrease of wear and tear of processed surfaces of all kinds of steels including previously thermally quenched ones. Obtained results are of importance for both determination of optimal regimes of plasma streams processing and the most resulting use of pulsed plasma streams for technology purposes, i.e. for identification of wear modes and optimal friction conditions for steels processed by plasma streams. |
uk_UA |
dc.description.sponsorship |
This work was funded by the project # 881 of the
Science and Technology Center in Ukraine (STCU) and
partly supported by Ministry of Education and Science
of Ukraine in the frame of International Collabortion. |
uk_UA |
dc.language.iso |
en |
uk_UA |
dc.publisher |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України |
uk_UA |
dc.relation.ispartof |
Вопросы атомной науки и техники |
|
dc.subject |
Low Temperature Plasma and Plasma Technologies |
uk_UA |
dc.title |
Influence of pulsed plasma streams processing on wear behavior of steels in different friction conditions |
uk_UA |
dc.type |
Article |
uk_UA |
dc.status |
published earlier |
uk_UA |
dc.identifier.udc |
533.9 |
|
Файли у цій статті
Ця стаття з'являється у наступних колекціях
Показати простий запис статті