Наукова електронна бібліотека
періодичних видань НАН України
періодичних видань НАН України
Comparison studies of tile/fiber systems manufactured from Kharkov injection molded and Kuraray SCSN-81 scintillators
Репозиторій DSpace/Manakin
JavaScript is disabled for your browser. Some features of this site may not work without it.
Comparison studies of tile/fiber systems manufactured from Kharkov injection molded and Kuraray SCSN-81 scintillators
Інші назви:
Сравнительное изучение изготовленных из харьковского литьевого сцинтиллятора и сцинтиллятора SCSN-81 фирмы Kuraray систем тайл/волокно
Тема:
Еxperimental methods
Інший ID:
PACS: 07.77.Ka
Посилання:
Comparison studies of tile/fiber systems manufactured from Kharkov injection molded and Kuraray SCSN-81 scintillators / A.A. Nemashkalo, V.P. Popov, P.V. Sorokin, A.E. Zatserklyany, A.Y. Borisenko, V.G. Senchishin // Вопросы атомной науки и техники. — 2000. — № 2. — С. 34-37. — Бібліогр.: 3 назв. — англ.
Дата:
2000
Переглядів:
836
Завантажень:
328
Анотація:
We present the results from measurements of light output, light yield uniformity, and recovery after radiation damage of tile/fiber systems made from the scintillator produced by the injection molding technique in Kharkov. The tiles were trapezoidal in shape, 131x90x122 mm3, with a Kuraray Y11 multi-clad WLS read-out. The results are compared with those obtained using the tile/fiber systems manufactured from the Kuraray SCSN-81 scintillator and tested under the same conditions. The light yield uniformity is found to be improved by masking. Effects of milling, polishing, painting of tile edges and mirroring the fiber end were studied.
