FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels

dc.contributor.author	Kaščák, L.
dc.contributor.author	Spišák, E.
dc.contributor.author	Kubik, R.
dc.contributor.author	Mucha, J.
dc.date.accessioned	2020-12-07T20:21:36Z
dc.date.available	2020-12-07T20:21:36Z
dc.date.issued	2016
dc.identifier.citation	FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels / L. Kaščák, E. Spišák, R. Kubik, J. Mucha // Проблемы прочности. — 2016. — № 4. — С. 74-80. — Бібліогр.: 11 назв. — англ.	uk_UA
dc.identifier.issn	0556-171X
dc.identifier.uri	http://dspace.nbuv.gov.ua/handle/123456789/173508
dc.description.abstract	The clinching tool with a die of 5 mm diameter with a specially formed gap and a punch of 3.6 mm diameter were used for mechanical joining of dual-phase steel sheets DP600 with the pressing force of 30 kN. The punch and die were deposited by PVD coating of CrN type with LARC technology. The coating state of each 50th manufactured join was evaluated by SEM. Cracks in the area of punch’s radius were detected. The finite element method was applied for the assessment of punch load in the joining process.	uk_UA
dc.description.sponsorship	This work was supported by the Slovak Research and Development Agency under the Contract No. APVV-14-0834 and Project VEGA No. 1/0872/14.	uk_UA
dc.language.iso	en	uk_UA
dc.publisher	Інститут проблем міцності ім. Г.С. Писаренко НАН України	uk_UA
dc.relation.ispartof	Проблемы прочности
dc.subject	Научно-технический раздел	uk_UA
dc.title	FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels	uk_UA
dc.title.alternative	Конечноэлементный расчет нагружения пуансона в заклепочном соединении двухфазных сталей	uk_UA
dc.type	Article	uk_UA
dc.status	published earlier	uk_UA
dc.identifier.udc	539.4