Наукова електронна бібліотека
періодичних видань НАН України

Перегляд Functional Materials, 2016, том 23 за назвою

Репозиторій DSpace/Manakin

Перегляд Functional Materials, 2016, том 23 за назвою

Сортувати за: Порядок: Результатів:

  • Eksperiandova, L.P. (Functional Materials, 2016)
    It is proposed a hybrid method for determination of water using low temperature directed crystallization. The length of the opaque upper part of obtained ice ingot depends on total salinity of water and serves as an ...
  • Bolesta, I.M.; Vistovskyy, V.V.; Gloskovska, N.V.; Rovetskij, I.M. (Functional Materials, 2016)
    Luminescence spectra of CdI₂ crystals with PbI₂ inclusions (10⁻⁵%) under synchrotron excitation at 8 K are examined in the present work. The spectra of the crystals grown from the melt exhibit luminescence peaks at 2.13 ...
  • Safronov, R.I.; Litvinov, L.A.; Voloshin, A.V.; Bochkov, V.F. (Functional Materials, 2016)
    Uniform thermal field with the axial temperature gradient of 11.6 K/cm was formed in a cylindrical heater. There were obtained 15x85x300 mm3 sapphire ribbons with dislocation density up to 103 cm-2. The dislocation density ...
  • Ran Zhao; Bowen Wang; Yafang Li; Shuying Cao; Jianwu Yan (Functional Materials, 2016)
    In order to accurately predict the magneto-elastic property of polymer-bonded magnetostrictive materials, a new mechanical-magneto coupled nonlinear model is proposed in this paper. In the proposed model, the total strain ...
  • Lukashova, M.S.; Belikov, K.N.; Bryleva, K.Yu.; Kharchenko, S.G.; Vishnevsky, S.G.; Kalchenko, V.I. (Functional Materials, 2016)
    Tetrahydroxythiacalixarene tetraphosponates were synthesized and chemically linked to chloromethylated polystyrene (Merrifield resin) surface via the Williamson reaction. In order to evaluate the effect of thiacalixarene ...
  • Kostenyukova, E.I.; Bezkrovnaya, O.N.; Kolybaeva, M.I.; Dolzhenkova, E.F.; Kovalenko, N.O.; Kanaev, A.; Pritula, I.M. (Functional Materials, 2016)
    Potassium dihydrogen phosphate (KDP) single crystals doped with L-arginine (L-arg) amino acid (with a concentration of 0.3 to 1.4 wt. % in the solution) were grown onto a point seed by the temperature reduction method. The ...
  • Cherednyk, M.I.; Popov, O.Yu.; Chornobuk, S.V.; Totsky, I.M.; Semenko, M.P.; Boshko, O.I.; Tkachuk, V.Ja.; Slobodianyk, Y.V.; Naumenko, S.M.; Makara, V.A. (Functional Materials, 2016)
    Influence of Y₂O₃ nanoparticles on sintered iron structure and microhardness is investigated. Ferrite grain growth is shown to be slowed down by the clusters which cause altering the grain shape from needle-like to equiaxial ...
  • Luzanov, A.V. (Functional Materials, 2016)
    For nanoclusters and solids, the localization analysis of one-electron states, or MOs (molecular orbitals), is frequently provided by using the so-called participation ratio (PR) index. To this conventional PR approach, ...
  • Chaika, M.A.; Vovk, O.M.; Safronova, N.A.; Parkhomenko, S.V.; Doroshenko, A.G.; Tolmachev, A.V. (Functional Materials, 2016)
    Cr-doped yttrium aluminum garnet ceramics with different concentration of additives Ca and Si were synthesized by vacuum reaction sintering. It was established that simultaneous doping with Ca and Si effects crucially on ...
  • Virchenko, Yu.P.; Lam Tan Phat (Functional Materials, 2016)
    One-dimensional stochastic model that describes radiative heat transfer in dielectric medium is built. It is done on the basis of representation that heat transfer in a solid is realized both by means of its heat conductivity ...
  • Datsko, Yu.N.; Rebrova, T.P.; Cherginets, V.L.; Naumenko, V.A.; Rebrov, A.L.; Mateychenko, P.V.; Vjunnik, I.N. (Functional Materials, 2016)
    Interaction of Zr getter with oxygen-containing admixtures being most abundant in molten alkali metal iodides (deoxidization) is studied. Reaction of Zr with oxide ions (in form of the corresponding alkali metal oxide) is ...
  • Dyachenko, A.A.; Panchenko, T.V. (Functional Materials, 2016)
    Results of experimental studying the processes of reversible optical and thermal reducing of the photochromic effect in Bi₁₂SiO₂₀:Al crystals are presented. It is shown that the optical reducing is the most effective in ...
  • Ratner, M.A.; Yanovsky, V.V. (Functional Materials, 2016)
    Process of the relaxation of a cluster with an intrinsic pore was investigated for different phases of a cluster. Main parameters, determining pore dissolving time were found. In particular, it was shown that there exists ...
  • Mikhailov, I.F.; Baturin, A.A.; Mikhailov, A.I.; Fomina, L.P. (Functional Materials, 2016)
    Perspectives are considered for increasing the sensitivity of X-ray analysis and broadening the range of measurements toward chemical elements with small atomic numbers up to hydrogen at the expense of formation of the ...
  • Mysiura, I.; Kalantaryan, O.; Kononenko, S.; Zhurenko, V.; Grigorenko, D.; Chishkala, V.; Azarenkov, N.; Avotin, S.; Rohmanov, N. (Functional Materials, 2016)
    The paper presents the results of systematic study of Poliskiy amber luminescence. The experiments were performed with specimens of natural amber with a variety of physical and chemical parameters. The luminescence was ...
  • Ageev, L.A.; Galunov, N.Z.; Rieznikova, V.M.; Makovetsky, E.D.; Karavaeva, N.L.; Krech, A.V. (Functional Materials, 2016)
    To extract and record scintillations, application of thin silver diffraction grating (DG) on fiber surface has been proposed, the fiber being based on gel composition SYLGARD-184. Such a grating has been formed in ...
  • Boledzyuk, V.B.; Kovalyuk, Z.D.; Kudrynskyi, Z.R.; Ivanov, V.I.; Shevchenko, A.D. (Functional Materials, 2016)
    Single crystals of FeIn₂Se₄ having a hexagonal structure and mirror-like cleaved surfaces were grown by the Bridgman method. X-ray spectroscopic analysis of the grown crystals was carried out. The morphology of their surface ...
  • Filatov, O.Yu.; Sidorko, V.I.; Kovalev, S.V.; Filatov, Y.D.; Vetrov, A.G. (Functional Materials, 2016)
    As a result of research of polishing single crystal materials it is shown that the material removal rate of the processed material depends on the volumetric wear coefficient and friction path length of element of the ...
  • Zhining Jia; Yanan Gao (Functional Materials, 2016)
    To study the process and property of hot-rolled stainless steel/carbon steel cladding bar, a rational pass system is designed for rolling and the bonding strength between the stainless steel cladding and carbon steel core ...
  • Автор відсутній (Functional Materials, 2016)

Пошук


Розширений пошук

Перегляд

Мій обліковий запис