Перегляд за автором "Bondarenko, M.N."

Сортувати за: Порядок: Результатів:

  • Erosion behavior of materials on basis of tungsten hot pressed in vacuum under mirror Penning discharge plasma impact 
    Glazunov, G.P.; Baron, D.I.; Bondarenko, M.N.; Konotopskiy, A.L.; Neklyudov, I.M.; Odeychuk, N.P.; Sayenko, S.Yu.; Surkov, A.E.; Tarasov, I.K.; Volkov, E.D. (Вопросы атомной науки и техники, 2007)
    The erosion behavior of porous W, W-Ni and W-Cu systems produced by hot pressing in vacuum was examined under exposure to plasmas of mirror Penning discharges in argon, nitrogen, helium and hydrogen. The erosion characteristic ...
  • Erosion behavior of tungsten coatings in magnetron type discharges with hot cathode 
    Glazunov, G.P.; Bondarenko, M.N.; Konotopskiy, A.L.; Volkov, E.D. (Вопросы атомной науки и техники, 2008)
    The investigations of erosion behavior of vacuum-arc deposited and chemical vapor deposited W-coatings were carried out under steady state plasma impact in magnetron type discharges of cylindrical configuration. For ...
  • Erosion behavior of W-Ta coatings in plasmas of stationary mirror Penning discharges 
    Belous, V.A.; Bondarenko, M.N.; Glazunov, G.P.; Ilchenko, A.V.; Kuprin, A.S.; Konotopskiy, A.L.; Lunyov, V.M.; Ovcharenko, V.D. (Вопросы атомной науки и техники, 2017)
    Investigations had been carried out of the influence of Ta alloying (2…16 wt.%) in W-coatings on their erosion behavior in steady state plasmas of Penning discharges in different gases: argon, nitrogen, and hydrogen. The ...
  • Erosion of vacuum-arc TiN coatings in plasma of stationary magnetron-type discharges 
    Glazunov, G.P.; Andreev, A.A.; Bondarenko, M.N.; Konotopskiy, A.L.; Stolbovoy, V.A. (Вопросы атомной науки и техники, 2011)
    Studies were made into erosion of titanium nitride coatings deposited onto stainless steel substrates in two different ways of vacuum-arc technology: with and without feeding high-voltage negative pulses on the substrate. ...
  • First tests of the biased movable B4C-limiter in the Uragan-2M torsatron under RF and UHF wall conditioning 
    Glazunov, G.P.; Baron, D.I.; Bondarenko, M.N.; Burchenko, P.Ya.; Chechkin, V.V.; Chernyshenko, V.Ya.; Grigor’eva, L.I.; Konovalov, V.G.; Konotopskiy, A.L.; Kotenko, V.G.; Lozin, A.V.; Maznichenko, S.M.; Moiseenko, V.E.; Pashnev, V.K.; Ponomarenko, N.P.; Solodovchenko, S.I.; Sorokovoy, Ye.L.; Shapoval, A.V.; Tereshin, V.I.; Voitsenya, V.S. (2010)
    The work describes the design of a multifunctional B4C-limiter, and reports preliminary results from experimental study of the limiter operated at steady-state and pulsed RF discharge cleaning regimes in the Uragan-2M torsatron.
  • Helium release from 12Cr18Ni10Ti stainless steel after impact of steady-state glow discharge helium plasma 
    Glazunov, G.P.; Bondarenko, M.N.; Konotopskiy, A.L.; Garkusha, I.E.; Maznichenko, S.M.; Tarasov, I.K. (Вопросы атомной науки и техники, 2021)
    The thermal desorption experiments were carried out to study the process of helium outgassing from the stainless steel 12Cr18Ni10Ti after exposure to a steady state glow discharge (GD) plasma in He atmosphere. The ...
  • Influence of different types of hydrogen treatment on hydrogen retention and release from 12Kh18N10T steel 
    Bondarenko, M.N.; Glazunov, G.P.; Konotopskiy, A.L.; Lozin, A.V.; Moiseenko, V.E.; Aksenov, N.N.; Garkusha, I.E.; Herashchenko, S.S.; Makhlaj, V.A. (Вопросы атомной науки и техники, 2018)
    Hydrogen outgassing from stainless steel was investigated after sample treatment by different plasmas: VHF/RF pulse discharges during wall conditioning in the Uragan-2M torsatron, with RF pulse plasma heating regime ...
  • Influence of movable B₄C-limiter on characteristics of RF discharge plasma in the Uragan-2M torsatron 
    Glazunov, G.P.; Lozin, A.V.; Konotopskiy, A.L.; Baron, D.I.; Beletskii, A.A.; Bondarenko, M.N.; Chechkin, V.V.; Dreval, M.B.; Grigor’eva, L.I.; Kozulya, M.M.; Maznichenko, S.M.; Moiseenko, V.E.; Mironov, Yu.K.; Pavlichenko, R.O.; Romanov, V.S.; Shapoval, A.N. (Вопросы атомной науки и техники, 2019)
    A variant of the B₄C movable biased pumped limiter for the Uragan-2M torsatron is described. Some results of experiments with the limiter moved from the vacuum chamber wall to the central region of the plasma column in the ...
  • Influence of porosity on erosion behavior and hydrogen permeability of tungsten films 
    Glazunov, G.P.; Andreev, A.A.; Baron, D.I.; Bondarenko, M.N.; Causey, R.A.; Hassanein, A.M.; Konotopskiy, A.L.; Neklyudov, I.M.; Tarasov, I.K.; Volkov, E.D. (Физическая инженерия поверхности, 2006)
    The erosion characteristics of dense and porous W-films deposited on Pd substrates were measured under impact of mirror Penning discharge nitrogen plasma. It is shown that the erosion rate of high porous tungsten films ...
  • In situ quantification of plasma facing surface Conditions in the Uragan-2M torsatron 
    Glazunov, G.P.; Baron, D.I.; Bondarenko, M.N.; Moiseenko, V.E.; Garkusha, I.E.; Konotopskiy, A.L.; Lozin, A.V.; Lyssoivan, A.I.; Wauters, T. (Вопросы атомной науки и техники, 2018)
    The method and device has been developed and used for operative estimation of impurity level, outgassing rate and number of impurity gases molecular layers, on the surface of the Uragan-2M (U-2M) vacuum chamber walls. It ...
  • Investigation of some factors influence on the work of extra pure hydrogen generator 
    Glazunov, G.P.; Konotopskiy, A.L.; Vinogradov, D.M.; Bondarenko, M.N.; Maznichenko, S.M.; Svynarenko, O.P. (Вопросы атомной науки и техники, 2017)
    The developed models of ultra-pure hydrogen generators had been designed, produced and tested. The influence of membrane temperature and form, position in the flame, installation of additional screens etc. were investigated. ...
  • Pd-W bimetallic systems: erosion behavior and hydrogen permeability 
    Glazunov, G.P.; Andreev, A.A.; Baron, D.I.; Bondarenko, M.N.; Causey, R.A.; Hassanein, A.M.; Konotopskiy, A.L.; Patokin, A.P.; Neklyudov, I.M.; Rybal’chenko, N.D.; Tarasov, I.K.; Volkov, E.D. (Вопросы атомной науки и техники, 2006)
    Erosion and hydrogen behavior are examined in the dense and high porous W-films on Pd. The obtained results are discussed from the viewpoint of plasma facing diffusion system creation for hydrogen isotope recycling control ...
  • Stellarator research at IPP KIPT: status and prospects 
    Moiseenko, V.E.; Glazunov, G.P.; Lozin, A.V.; Konotopskiy, A.L.; Baron, D.I.; Beletskii, A.A.; Bondarenko, M.N.; Chechkin, V.V.; Dreval, M.B.; Grigor’eva, L.I.; Kozulya, M.M.; Maznichenko, S.M.; Mironov, Yu.K.; Pavlichenko, R.O.; Romanov, V.S.; Shapoval, A.N.; Korovin, V.B.; Konovalov, V.G.; Zamanov, N.V.; E.V., Turianska; Kulyk, Yu.S.; Wauters, T.; Lyssoivan, A.I.; Ågren, O.; Garkusha, I.E.; Uragan-2M Team (Вопросы атомной науки и техники, 2019)
    Features of the recent Uragan-2M campaign are reviewed together with some theoretical advances. They include experiments with B4C limiter, studies of various 1…20 kHz oscillations, development of a new in-situ diagnostics ...
  • Tests of tungsten limiter with controlled hydrogen puffing in the torsatron Uragan-3M 
    Glazunov, G.P.; Andreev, A.A.; Baron, D.I.; Bondarenko, M.N.; Volkov, E.D. (Вопросы атомной науки и техники, 2009)
    Working model of plasma facing W-limiter with controlled hydrogen recycling has been created. The limiter was installed in the Uragan-3M torsatron and was tested under the edge plasma conditions.
  • The effect of nitrogen pressure during vacuum-arc TiN coatings deposition on the erosoin resistance in plasma of magnetron type discharges 
    Glazunov, G.P.; Andreev, A.A.; Sobol, O.V.; Bondarenko, M.N.; Konotopskiy, A.L.; Stolbovoy, V.A. (Вопросы атомной науки и техники, 2014)
    The erosion process was investigated of TiN coatings which were made with the vacuum-arc sputtering of Ti at the different nitrogen pressures (10⁻⁴…5•10⁻³ Torr). The erosion rates were measured by the weighting on analytical ...
  • The influence of plasma treatment of different cathode materials on current-voltage characteristics of mirror discharge in air 
    Glazunov, G.P.; Bondarenko, M.N.; Konotopskiy, A.L. (Вопросы атомной науки и техники, 2013)
    The behavior was investigated of current-voltage characteristics of Penning discharges in air atmosphere. Such materials were used as cathodes: stainless steel 12KH18N10T, iron, nickel, titanium, copper, aluminum, tungsten. ...
  • The influence of wall conditioning procedures on outgassing rate of stainless-steel in the “Uragan-2M” torsatron 
    Glazunov, G.P.; Baron, D.I.; Bondarenko, M.N.; Chernyshenko, V.Ya.; Konotopskiy, A.L.; Listopad, V.M.; Maznichenko, S.M.; Pashnev, V.K. (Вопросы атомной науки и техники, 2012)
    Using the thermal desorption method the investigations were carried out of stainless steel probe outgassing rate in a vacuum and estimation of the number of monolayers on its surface in the Uragan-2M torsatron in situ. The ...
  • Vacuum-plasma properties of stainless steel after impact of combined glow-microwave discharges in argon atmosphere 
    Glazunov, G.P.; Moiseenko, V.E.; Maznichenko, S.M.; Bondarenko, M.N.; Konotopskiy, A.L.; Tarasov, I.K.; Shapoval, A.N. (Вопросы атомной науки и техники, 2021)
    The experiments were carried out to determine the vacuum-plasma characteristics (mainly erosion and outgassing rate in a vacuum) of the stainless steel 12X18H10T before and after processing the walls of the vacuum chamber ...