Перегляд за автором "Bizyukov, I.A."

Сортувати за: Порядок: Результатів:

  • Combined exposures of tungsten by stationary and transient hydrogen plasma heat loads: preliminary results 
    Makhlaj, V.A.; Aksenov, N.N.; Byrka, O.V.; Garkusha, I.E.; Bizyukov, A.A.; Bizyukov, I.A.; Girka, O.I.; Sereda, K.N.; Bazdyreva, S.V.; Malykhin, S.V.; Pugachov, A.T. (Вопросы атомной науки и техники, 2013)
    Influence of combined hydrogen plasma exposures on tungsten behavior was studied in QSPA Kh-50 facility and steady-state ion beam system FALCON. Pulsed plasma loads (0.45 MJ/m²) were below the tungsten melting threshold. ...
  • Erosion features of tungsten surfaces under combined steady-state and transient plasma loads 
    Herashchenko, S.S.; Makhlaj, V.A.; Girka, O.I.; Aksenov, N.N.; Bizyukov, I.A.; Malykhin, S.V.; Surovitskiy, S.V.; Sereda, K.N.; Bizyukov, A.A. (Вопросы атомной науки и техники, 2016)
    The paper presents the experimental research on damage of the tungsten surfaces under combined plasma exposures. Steady-state hydrogen exposures (particle flux of 2×10²² m⁻²s⁻¹ , heat flux of 1.7 MW/m² , fluence of 1026 ...
  • Ion beam system for nanotrimming of functional microelectronics layers 
    Bizyukov, A.A.; Bizyukov, I.A.; Girka, O.I.; Sereda, K.N.; Sleptsov, V.V.; Gutkin, M.; Mishin, S. (Вопросы атомной науки и техники, 2011)
    This paper concerns with investigation of the trimming process which uses ion beam etching for high-precision adjustment of the thickness of functional microelectronics layers. The layer deposited on the substrate is ...
  • Key properties of mixed W-C-D surface related to tungsten erosion 
    Bizyukov, I.A. (2010)
    The erosion of tungsten exposed to the mixed particle flux of carbon and deuterium ions is effected by several factors. The main factor is the formation of mixed W-C-D surface, which decreases content of tungsten atoms in ...
  • Mass-separation of impurities in the ion beam systems with reversed magnetic beam focusing 
    Girka, O.I.; Bizyukov, I.A.; Bizyukov, A.A.; Sereda, K.N.; Herashchenko, S.S. (Вопросы атомной науки и техники, 2012)
    This paper describes the intrinsic capability of ion systems with reversed magnetic beam focusing for impurities mass-separation. Numerical calculation of the ion trajectory deviation with taking into account the experimental ...
  • Solid ion accelerator based on magnetron sputtering discharge 
    Azarenkov, N.A.; Bizyukov, I.A.; Kashaba, A.Y.; Sereda, K.N. (Вопросы атомной науки и техники, 2004)
    A new solid ion accelerator based on magnetron sputtering discharge is described. The ions of working gas are used to bombard and sputter a cylindrical target made of metal or dielectric material. The sputtered atoms can ...
  • Solid ion source based on hollow-cylindrical magnetron sputtering discharge 
    Azarenkov, N.A.; Bizyukov, A.A.; Bizyukov, I.A.; Bobkov, V.V.; Kashaba, A.E.; Krieger, K.; Sereda, K.N.; Tarasov, I.K. (Вопросы атомной науки и техники, 2003)
    A new solid ion source is described. The ion source based on hollow-cylindrical magnetron sputtering discharge produces the beam of various solid ions (B, C, Si, Ti, V, Fe, Ni, Ta, W) which are then extracted by an ion ...
  • Sputtering of tungsten exposed to high-flux and high-fluence hydrogen ion beam 
    Bizyukov, I.A. (Вопросы атомной науки и техники, 2013)
    Tungsten samples were irradiated by hydrogen ion beam with high heat (0.1…1.05 MW·m⁻²) and particle [(0.13…1.3)×10²² m⁻²s⁻1] flux generated by FALCON ion source. The sputtering yield has remained nearly constant in the ...
  • The formation of cupper transition nano-layer in polytetrafluoroethylene surface by means of ion beam assisting deposition 
    Azarenkov, N.A.; Bizyukov, I.A. (2010)
    The deposition of Cu on polytetrafluoroethylene surface assisted by the Ar ion beam with the temperature of 1 keV is investigated numerically. Ar ions provide the kinematic mixing of Cu atoms and atoms of substrate forming ...