Strength Improvement of Ferritic/Martensitic T91 Steel by Cross Wedge Rolling at Different Austenitizing Temperatures

dc.contributor.author	He, T.
dc.contributor.author	Min, L.
dc.contributor.author	Liu, H.J.
dc.date.accessioned	2020-12-12T13:58:31Z
dc.date.available	2020-12-12T13:58:31Z
dc.date.issued	2017
dc.identifier.citation	Strength Improvement of Ferritic/Martensitic T91 Steel by Cross Wedge Rolling at Different Austenitizing Temperatures / T. He, L. Min, H.J. Liu // Проблемы прочности. — 2017. — № 1. — С. 72-78. — Бібліогр.: 14 назв. — англ.	uk_UA
dc.identifier.issn	0556-171X
dc.identifier.uri	http://dspace.nbuv.gov.ua/handle/123456789/173584
dc.description.abstract	Cross wedge rolling (CWR) is a forming technique wherein the processed material microstructure is controlled by the processing temperature. The initial results on CWR-processed T91 steels at different austenitizing temperatures are discussed with the microstructure analysis by various characterization techniques, such as the optical and scanning electron microscopies. The processed T91 specimens were much harder than water-quenched ones, their hardness being independent of the ausforming temperatures despite their microstructural differences.	uk_UA
dc.description.sponsorship	This study has been perfomed within framework of the project ZKL-PR-200305 entitled “T91 Shaft Formed by Cross Wedge Rolling,” E3-0507-16-0201-16XKCZ01 entitled “Discipline Construction of Mechanical Engineering” and 16030501200 entitled “Research on Key Technologies of Underwater Vehicles for Deep-sea Oil and Gas Fields.” We wish to thank X. H. Zhang, M. Song, and L. B. Hang for discussions and advice, which resulted in significant improvements. The provision of microscopes at the Microscopy and Imaging Center at Texas A&M University is also gratefully acknowledged. Remove selected	uk_UA
dc.language.iso	en	uk_UA
dc.publisher	Інститут проблем міцності ім. Г.С. Писаренко НАН України	uk_UA
dc.relation.ispartof	Проблемы прочности
dc.subject	Научно-технический раздел	uk_UA
dc.title	Strength Improvement of Ferritic/Martensitic T91 Steel by Cross Wedge Rolling at Different Austenitizing Temperatures	uk_UA
dc.title.alternative	Повышение прочности феррито-мартенситной стали Т91 после прокатки при различных температурах аустенизации	uk_UA
dc.type	Article	uk_UA
dc.status	published earlier	uk_UA
dc.identifier.udc	539.4