Fiber Laser Welding of Dual-Phase and Bake-Hardened Steels

dc.contributor.author	Švec, P.
dc.contributor.author	Schrek, A.
dc.contributor.author	Csicsó, T.
dc.date.accessioned	2020-12-07T20:07:13Z
dc.date.available	2020-12-07T20:07:13Z
dc.date.issued	2016
dc.identifier.citation	Fiber Laser Welding of Dual-Phase and Bake-Hardened Steels / P. Švec, A. Schrek, T. Csicsó // Проблемы прочности. — 2016. — № 4. — С. 14-20. — Бібліогр.: 11 назв. — англ.	uk_UA
dc.identifier.issn	0556-171X
dc.identifier.uri	http://dspace.nbuv.gov.ua/handle/123456789/173502
dc.description.abstract	Microstructural changes and microhardness profiles of laser-welded dual-phase DP600 and bakehardened 220BH steels were evaluated. The joints of these steels were butted with different welding parameters. They exhibited the microstructural changes, from ferrite and martensite in dual-phase steels or ferrite in bake-hardened steels to acicular ferrite, bainite and martensite in the fusion and heat-affected zones of the weld joints. As a result of welding, microhardness increases significantly in the fusion zones and even more in the heat-affected zones near DP600 steel.	uk_UA
dc.description.sponsorship	This study was supported by the Slovak Research and Development Agency under contract No. APVV-0281-12.	uk_UA
dc.language.iso	en	uk_UA
dc.publisher	Інститут проблем міцності ім. Г.С. Писаренко НАН України	uk_UA
dc.relation.ispartof	Проблемы прочности
dc.subject	Научно-технический раздел	uk_UA
dc.title	Fiber Laser Welding of Dual-Phase and Bake-Hardened Steels	uk_UA
dc.title.alternative	Сварка волоконным лазером двухфазных сталей и сталей, упрочненных обжигом	uk_UA
dc.type	Article	uk_UA
dc.status	published earlier	uk_UA
dc.identifier.udc	539.4