Проблемы прочности, 2008, № 1http://dspace.nbuv.gov.ua:80/handle/123456789/325972024-03-28T17:35:18Z2024-03-28T17:35:18ZТитульные страницы и содержаниеhttp://dspace.nbuv.gov.ua:80/handle/123456789/485462013-08-21T11:32:58Z2008-01-01T00:00:00ZТитульные страницы и содержание
2008-01-01T00:00:00ZPrefacePokluda, J.http://dspace.nbuv.gov.ua:80/handle/123456789/485452013-08-21T11:31:51Z2008-01-01T00:00:00ZPreface
Pokluda, J.
2008-01-01T00:00:00ZDeformation resistance and structure-forming processes of iron aluminides in hot rollingSuchanek, P.Schindler, I.Kratochvil, P.Hanus, P.http://dspace.nbuv.gov.ua:80/handle/123456789/484632013-08-19T20:08:22Z2008-01-01T00:00:00ZDeformation resistance and structure-forming processes of iron aluminides in hot rolling
Suchanek, P.; Schindler, I.; Kratochvil, P.; Hanus, P.
We have developed simple mathematical models of mean equivalent stress dependence on temperature and strain for selected iron aluminides. Four similar melts with 16.5-19.2 wt.% of Al, 4 wt.% of Cr and with various contents of Ti and B were studied and compared. Flat specimens graded by thickness were hot rolled. Deformation resistance was calculated from the roll force values obtained using a laboratory mill Tandem. Postdynamic structure-forming processes of the tested aluminides, as well as their cracking susceptibility, were investigated by metallography. The differences in the deformation behavior and formability of the tested aluminides were described.; Разработаны простые математические модели зависимости среднего эквивалентного напряжения от температуры и деформации для выбранных алюминидов железа. Были изучены и сравнены четыре одинаковые плавки, содержащие 16,5...19,2 вес.% Al, и 4 вес.% Сг и различное количество титана и бора. Плоские образцы, рассортированные по толщине, подвергались горячей прокатке. Сопротивление деформированию рассчитывали по величине усилия на валки, определенной с использованием лабораторного прокатного стана Тандем. Процессы структурообразования испытанных алюминидов после динамического воздействия и их склонность к трещинообразованию исследовали с использованием металлографии. Описаны наблюдавшиеся различия в поведении испытанных алюминидов при деформировании и в способности к формоизменению.
2008-01-01T00:00:00ZAnalysis of fracture mechanisms and surface quality in drilling of composite materialsSedlacek, J.Humar, A.http://dspace.nbuv.gov.ua:80/handle/123456789/484622013-08-19T20:00:53Z2008-01-01T00:00:00ZAnalysis of fracture mechanisms and surface quality in drilling of composite materials
Sedlacek, J.; Humar, A.
The aim of this work is to clarify the interaction mechanisms between the drilling tool and material. Drilling tests were carried out on glass/polyester and carbon/epoxy composites using different twist drills. The cutting tools and machined surfaces were examined by optical microscopy, scanning microscopy and surface profilometry to study composite damage and tool wear. Among the defects caused by drilling, delamination appears to be the most critical and may occurs at both the entrance and exit planes. A prediction model of thrust force for drilling without delamination is proposed.; Определены механизмы взаимодействия между сверлом и материалом. Испытания проводили на стеклонаполненном полиэфире и эпоксикарбопласте с использованием различных спиральных сверл. Режущий инструмент и обработанные поверхности изучали с помощью оптической микроскопии, сканирующей микроскопии и поверхностной профилометрии, чтобы выявить повреждение композиционного материала и износ инструмента. Среди дефектов, вызванных сверлением, наиболее серьезным является расслоение как на плоскостях входа, так и выхода. Предложена модель прогнозирования усилия подачи при сверлении без расслоения.
2008-01-01T00:00:00Z