Електротехніка і електромеханіка, 2017, № 6http://dspace.nbuv.gov.ua:80/handle/123456789/1441502024-03-29T11:55:02Z2024-03-29T11:55:02ZТитульні сторінки та змістhttp://dspace.nbuv.gov.ua:80/handle/123456789/1479852019-02-16T23:24:42Z2017-01-01T00:00:00ZТитульні сторінки та зміст
2017-01-01T00:00:00ZManaging the load schedule of the administrative building taking into account emerging risks when connecting the kinetic energy storage to the power supply systemShevchenko, S.Yu.Savchenko, N.A.Tretjak, A.V.http://dspace.nbuv.gov.ua:80/handle/123456789/1476102019-02-15T23:25:14Z2017-01-01T00:00:00ZManaging the load schedule of the administrative building taking into account emerging risks when connecting the kinetic energy storage to the power supply system
Shevchenko, S.Yu.; Savchenko, N.A.; Tretjak, A.V.
Purpose. The purpose of the paper is to analyze load schedules of the administrative building and develop a structural
scheme for connecting the kinetic energy storage in the power supply system of this building, which will allow using it as a
consumer regulator, as well as a theoretical study of the risks that arise. Methodology. To conduct the research, the theory
of designing internal electrical networks of buildings, the theory of plotting electric load graphs, methods of the theory of
electromechanical systems and for analyzing the risk system, the T. Saati method of hierarchies were used. Results. The
structure of kinetic energy storage (KES) connection to the power supply system of the administrative building is developed
and the structural diagram of the KES proposed for installation is given, the average daily winter and summer load
schedules are presented, a set of groups and subgroups of risks and their influence on the work of the power supply system
of the building are connected with the connection of the KES. Originality. For the first time, the application of the kinetic
energy storage in the power supply system of the building with the analysis of emerging risks is considered, which makes it
possible to improve the reliability of the developed system and the efficiency of load regulation. Practical value. The
application of the proposed scheme will make it possible to use administrative buildings as load regulators of the external
power supply system, and also effectively manage the load in the internal power supply system of the building.; Цель. Целью статьи является разработка структурной схемы подключения кинетического энергонакопителя в
систему электроснабжения административного здания, что позволит использовать это здание в качестве
потребителя - регулятора, а также теоретическое исследование возникающих при этом рисков. Методика. Для
проведения исследований использовались теория проектирования внутренних электрических сетей зданий, теория
построения графиков электрической нагрузки, методы теории электромеханических систем и для анализа системы
рисков метод иерархий Т. Саати. Результаты. Разработана структура подключения кинетического
энергонакопителя (КЭН) в систему электроснабжения административного здания и приведены суточные графики
нагрузок, исследован набор групп и подгрупп рисков и их влияние на работу системы электроснабжения здания при
подключении КЭН. Научная новизна. Впервые рассмотрено применение кинетического энергонакопителя в системе
электроснабжения здания с анализом возникающих рисков, что позволяет повысить надежность работы
разработанной системы и эффективность регулирования нагрузки. Практическое значение. Применение
предложенной схемы позволит использовать административные здания в качестве регуляторов нагрузки внешней
системы электроснабжения, а также эффективно управлять нагрузкой во внутренней системе электроснабжения
здания.
2017-01-01T00:00:00ZМониторинг стабильности технологического процесса изготовления электроизоляционных систем тяговых электрических машинБеспрозванных, А.В.Рогинский, А.В.http://dspace.nbuv.gov.ua:80/handle/123456789/1476092019-02-15T23:23:33Z2017-01-01T00:00:00ZМониторинг стабильности технологического процесса изготовления электроизоляционных систем тяговых электрических машин
Беспрозванных, А.В.; Рогинский, А.В.
Показано, что сопротивление изоляции может служить информативным параметром стабильности технологического процесса изготовления электроизоляционных систем тяговых электрических машин. Установлено, что сопротивление изоляции находится в пределах ±3σ относительно среднего значения каждой выборки трех вариантов исполнения электроизоляционной системы. Представлены контрольные карты индивидуальных значений и кумулятивных сумм сопротивления изоляции магнитной системы тяговых электродвигателей постоянного тока.; Показано, що опір ізоляції можливо застосовувати в якості інформативного параметру стабільності технологічного
процесу виготовлення електроізоляційних систем тягових електричних машин. Встановлено, що опір ізоляції знаходиться в межах ±3σ відносно середнього значення кожної вибірки трьох варіантів виконання електроізоляційної системи. Представлено контрольні карти індивідуальних значень та кумулятивних сум опору ізоляції магнітної системи тягових електродвигунів постійного струму; Introduction. Electrical insulation systems make up about 0.03
% of the traction electric machines (TEM) mass, but they are of
exceptional importance and affect the design capabilities and
manufacturing techniques of electric machines, ultimately - on
their specific weight and overall dimensions, on the reliability
and durability of the TEM. Purpose. The monitoring of the stability of the manufacturing process of electrical insulating systems of the TEM based on the insulation resistance measurements. Methodology. The analysis of the manufacturing process
is carried out for three versions of the case of insulation of the
magnetic system of the DC traction electric motor. Practical
value. Construction and analysis of special graphs (charts) of
individual values and cumulative sums of insulation resistance,
sliding range MR allow to find out whether the technological
process of manufacturing electric insulating systems of traction
electric machines is in a statistically controllable state
2017-01-01T00:00:00ZПриближенный расчет основных характеристик плазмы при воздушном электрическом взрыве металлического проводникаБаранов, М.И.Рудаков, С.В.http://dspace.nbuv.gov.ua:80/handle/123456789/1476082019-02-15T23:23:43Z2017-01-01T00:00:00ZПриближенный расчет основных характеристик плазмы при воздушном электрическом взрыве металлического проводника
Баранов, М.И.; Рудаков, С.В.
Приведены результаты приближенного расчета максимальных значений температуры Tm, давления Pm и скорости
vm распространения ударной волны в «металлической плазме», образующейся при воздушном электрическом взрыве
(ЭВ) тонкого металлического проводника под воздействием большого импульсного тока (БИТ). Показано, что при
ЭВ в атмосферном воздухе тонкого медного проводника в разрядной цепи высоковольтного генератора БИТ микросекундного временного диапазона максимальные значения температуры Tm, давления Pm и скорости vm в локальной
зоне ее взрыва могут достигать соответственно нескольких десятков тысяч градусов кельвина, сотен технических атмосфер и тысяч метров в секунду. Сформулированы возможные пути получения в разрядной цепи мощной
конденсаторной батареи высоковольтного генератора БИТ «рекордных» значений температуры Tm, давления Pm и
скорости vm; Приведені результати наближеного розрахунку максимальних значень температури Tm, тиску Pm і швидкості vm розповсюдження ударної хвилі в «металевій плазмі», що утворюється при повітряному електричному вибуху (ЕВ) тонкого металевого провідника під дією великого імпульсного струму (ВІС). Показано, що при ЕВ в атмосферному повітрі
тонкого мідного провідника в розрядному колі високовольтного генератора ВІС мікросекундного часового діапазону
максимальні значення температури Tm, тиску Pm і швидкості vm в локальній зоні її вибуху може досягати відповідно
декількох десятків тисяч градусів кельвина, сотень технічних атмосфер і тисяч метрів в секунду. Сформульовані
можливі шляхи отримання в розрядному колі потужної конденсаторної батареї високовольтного генератора ВІС
«рекордних» значень температури Tm, тиску Pm і швидкості vm.; Purpose. Obtaining approximate calculation correlations for
determination of maximal values of temperature Tm, and pressures
Pm at a shock wave and speed vm distribution of a shock wave in
the plasma products of air electric explosion (EE) of metall conductor under act of large impulsive current (LIC). Methodology.
Theoretical bases of the electrical engineering, scientific and
technical bases of electrophysics, thermal physics and electrophysics bases of powerful high-voltage impulse technique, related
to the theory and practice of the phenomenon EE metallic explorer in gas environments under action of LIC. Results. New
calculation correlations are got for approximate calculation in a
local area of EE in atmospheric air of metallic explorer of maximal values of temperature Tm,, pressures Pm and speeds of vm of
shock wave in «metallic plasma» appearing from an explosion
under action of LIC of its conducting structure. It is set that numeral values of the sought after sizes of temperature Tm,, pressures Pm and speeds vm as it applies to air EE thin copper conductor under the action of LIC of the microsecond temporal range
can arrive at a few ten of thousands of Kelvin, hundreds of technical atmospheres and thousands of meters in a second accordingly.
It is shown that similar values of speed vm of shock wave in «metallic plasma» are comparable at speed of detonation wave in
hard explosives. An accent is in this connection done on expedience of application air EE thin short metallic conductors at injury
of live ammunitions with an ordinary and nuclear explosive. The
real technical suggestions are offered on a possible receipt in the
discharge circuit of powerful high-voltage generator of LIC of
condenser type of «record» (most) values of the examined descriptions of «metallic plasma» at air EE thin metallic conductors.
Comparison of the obtained results is executed for the probed
descriptions of plasma at air EE of the metal conductor with
known in the world information in area of electrophysics and
thermal physics EE metal in gas environments. Originality. The
obtained new theoretical results in area of high-current electrophysics and high-temperature thermal physics extend our physical
views about the phenomenon of EE in atmospheric air of thin
metallic conductors under action of LIC of the nanosecond and
microsecond duration. Practical value. Application of the calculation correlations obtained in practice for the indicated descriptions of «metallic plasma» will allow technicians-and-engineers in
a certain measure to accelerate and improve adjusting of difficult
electric charts of powerful high-voltage generator of LIC at a
receipt in his discharge circuit by air EE of thin metal conductors
required on protocol of lead through of heavy-current electrophysics experiments of parameters of plasma in the local zone of
its explosion
2017-01-01T00:00:00Z