Електротехніка і електромеханіка, 2015, № 2http://dspace.nbuv.gov.ua:80/handle/123456789/1441012024-03-29T12:15:20Z2024-03-29T12:15:20ZВозбуждаемые усилия притяжения в симметричной индукционной индукторной системе – универсальном инструменте магнитно-импульсной рихтовкиГнатов, А.В.http://dspace.nbuv.gov.ua:80/handle/123456789/1488172019-02-18T23:23:52Z2015-01-01T00:00:00ZВозбуждаемые усилия притяжения в симметричной индукционной индукторной системе – универсальном инструменте магнитно-импульсной рихтовки
Гнатов, А.В.
Проведен расчет возбуждаемых усилий притяжения в симметричной индукционной индукторной системе – универсальном инструменте магнитно-импульсной рихтовки. По полученным аналитическим зависимостям проведены
численные оценки с построением объёмных эпюр, фазовых и радиальных зависимостей амплитуднопространственного распределения возбуждаемых сил притяжения. Определено, что влияние магнитных свойств
экрана и заготовки проявляется в появлении мощных сил магнитного притяжения.; Проведено розрахунок збуджуваних зусиль притягання в симетричній індукційної індукторній системі – універсальному інструменті магнітно-імпульсної рихтування. За отриманими аналітичним залежностям проведені чисельні
оцінки з побудовою об'ємних епюр, фазових і радіальних залежностей амплітудно-просторового розподілу збуджуваних сил притягання. Визначено, що вплив магнітних властивостей екрану і заготівки проявляється в появі потужних
сил магнітного притягання.; Recently, repair and recovery of vehicle body operations become more and more popular. A special place here is taken by
equipment that provides performance of given repair operations. The most interesting are methods for recovery of car body
panels that allow the straightening without disassembling of car
body panels and damaging of existing protective coating. Now,
there are several technologies for repair and recovery of car
body panels without their disassembly and dismantling. The
most perspective is magnetic-pulse technology of external noncontact straightening. Results. The calculation of excited loads
attractions in a symmetrical inductor system in the universal
tool of magnetic-pulse straightening is provided. According to
the obtained analytical dependence of the numerical evaluation
of volumetric construction diagrams, phase and amplitude of the
radial dependence of the spatial distribution of the excited
efforts of attraction is obtained. The influence of the magnetic
properties of the blank screen and manifested in the appearance
of powerful magnetic attraction forces is determined. Originality. A new trend of research of magnetic-pulse working of thinwalled metals has been formulated and received further development, which allows to create not only new equipment, but
principally new technological processes of external non-contact
repair and recovery of vehicle body panels. Scientific basis of
electrodynamic and magnetic attraction of thin-walled sheet
metals with using the energy of high-power pulsed fields was
created for the first time and proved theoretically and experimentally. Scientific and technical solutions in design of effective
tools based on single-turn inductor systems of cylindrical geometry for straightening and recovery of car body panels were
formulated and proved theoretically, as well as experimentally.
Practical value. Using the results of the calculations we can
create effective tools for an external magnetic pulse straightening of car body panels.
2015-01-01T00:00:00ZТрехэлектродный воздушный коммутатор с графитовыми электродами КВТГ-50 на напряжение до ±50 кВ и импульсный ток амплитудой до ±220 кАБаранов, М.И.Рудаков, С.В.Цехмистро, В.Л.http://dspace.nbuv.gov.ua:80/handle/123456789/1488162019-02-18T23:25:15Z2015-01-01T00:00:00ZТрехэлектродный воздушный коммутатор с графитовыми электродами КВТГ-50 на напряжение до ±50 кВ и импульсный ток амплитудой до ±220 кА
Баранов, М.И.; Рудаков, С.В.; Цехмистро, В.Л.
Представлены основные технические характеристики и краткое описание конструкции высоковольтного трехэлектродного сильноточного воздушного коммутатора с графитовыми электродами КВТГ-50 на номинальное напряжение ±50 кВ. Созданный образец коммутатора предназначен для работы в разрядной цепи мощного высоковольтного
генератора нормированных микросекундных импульсов тока искусственной молнии с амплитудой Im=±(200±20) кА
при их длительности τp=(350±35) мкс на уровне 0,5·Im. Данный коммутатор каскадного типа из-за применения графитовых электродов обладает повышенным рабочим ресурсом и повышенной стабильностью срабатывания при его
использовании в составе генератора тока имитированной линейной молнии.; Представлені основні технічні характеристики і короткий опис конструкції високовольтного трьохелектродного сильнострумового повітряного комутатора з графітовими електродами КВТГ-50 на номінальну напругу ±50 кВ. Створений
зразок комутатора призначений для роботи в розрядному колі потужного високовольтного генератора нормованих мікросекундних імпульсів струму штучної блискавки з амплітудою Im=±(200±20) кА при їх тривалості τp=(350±35) мкс на
рівні 0,5·Im. Даний комутатор каскадного типу із-за застосування графітових електродів володіє підвищеним робочим
ресурсом і підвищеною стабільністю спрацьовування при його використанні у складі генератора струму імітованої
лінійної блискавки.; Purpose. Development and creation of the simplified construction of a high-voltage heavy-current air three-electrode
switchboard with graphite electrodes, intended for operation in
composition the powerful generator of large impulsive current
of artificial of linear lightning. Methodology. Electrophysics
bases of technique of high-voltage and scientific and technical
bases of planning of devices of high-voltage impulsive technique. Results. Developed and made a new construction of a
high-voltage heavy-current air three-electrode switchboard with
the graphite electrodes of KATG-50 on nominal voltage ±50 kV.
This construction of switchboard KATG-50 has been passed
experimental approbation in composition the heavy-current bit
chain of powerful high-voltage generator of the аperiodic impulses of current of artificial linear lightning rationed on operating foreign standards with amplitude of Im=±(200±20) кА at
their duration τP=(350±35) μs at level 0,5·Im. Originality. First
in domestic practice of development and creation of highvoltage heavy-current switchboards for the generators of large
impulse currents of artificial lightning the ground of necessity of
the use for their basic and managing electrodes of electrical
engineering graphite is carried out. Practical value. The developed and made high-voltage heavy-current switchboard of cascade-tray KATG-50 from application in its composition of
graphite electrodes possesses an enhanceable working resource
and enhanceable stability of wearing-out at the use of similar
switchboard in the bit chain of powerful pulsed current of the
imitated linear lightning.
2015-01-01T00:00:00ZПро граничні рішення рівнянь високовольтного каскадного генератора напруги постійного струмуБржезицький, В.О.Десятов, О.М.Козюра, В.В.http://dspace.nbuv.gov.ua:80/handle/123456789/1488152019-02-18T23:23:50Z2015-01-01T00:00:00ZПро граничні рішення рівнянь високовольтного каскадного генератора напруги постійного струму
Бржезицький, В.О.; Десятов, О.М.; Козюра, В.В.
В статті досліджене питання розрахунку режимів напруги високовольтного каскадного генератора з нелінійним навантаженням за допомогою аналітичного методу при різних умовах вибору значень його складових елементів. Особливість методу дослідження полягає в тому, що при проведенні багатоваріантних розрахунків залишаються незмінними вихідні параметри навантаження генератора. Для каскадного високовольтного джерела постійного струму
знайдені умови, при яких можуть бути суттєво зменшені ємності високовольтних конденсаторів каскадного генератора.; В статье исследован вопрос расчета режимов напряжения высоковольтного каскадного генератора с нелинейной
нагрузкой с помощью аналитического метода при различных условиях выбора значений его составляющих элементов.
Особенность метода исследования заключается в том, что при проведении многовариантных расчетов остаются
неизменными выходные параметры нагрузки генератора. Для каскадного высоковольтного источника постоянного
тока найдены условия, при которых могут быть существенно уменьшены емкости высоковольтных конденсаторов
каскадного генератора.; In the paper the issue of calculating the high voltage cascade
mode oscillator with a nonlinear load using the analytical
method under different conditions of selection values of its components is presented. The peculiarity of the method of the study
is that during multivariate calculations output parameters load
generator remain unchanged. For high-voltage cascade direct
current power found conditions under which can be significantly
reduced high capacity capacitors cascade generator. The calculations show that acceptable for practical applications of highvoltage characteristics of cascade generators can be achieved
with substantial reduction of the volume of their constituents,
and thus substantial decline in their value.
2015-01-01T00:00:00ZАнализ электромагнитных процессов в индукторной системе – инструменте рихтовки автомобильных кузововБатыгин, Ю.В.Чаплыгин, Е.А.Шиндерук, С.А.http://dspace.nbuv.gov.ua:80/handle/123456789/1488142019-02-18T23:23:45Z2015-01-01T00:00:00ZАнализ электромагнитных процессов в индукторной системе – инструменте рихтовки автомобильных кузовов
Батыгин, Ю.В.; Чаплыгин, Е.А.; Шиндерук, С.А.
С привлечением расчетных зависимостей для плотности индуцированных токов и распределенной силы притяжения
проведен анализ процессов в экспериментальных моделях индукторной системы с притягивающим экраном и
внешним дополнительным витком. Дана численная оценка влияния дополнительных витков на пространственновременные распределения основных характеристик электромагнитных процессов.; Із залученням розрахункових залежностей для щільності індукованих струмів і розподіленої сили тяжіння проведено
аналіз процесів в експериментальних моделях індукторної системи з притягуючим екраном і зовнішнім додатковим
витком. Дана чисельна оцінка впливу додаткових витків на просторово-часові розподіли основних характеристик
електромагнітних процесів.; Introduction. One of the promising directions of
electromagnetic forming (EMF) is a contactless magnetic-pulse
straightening of the automobile bodies. The efficiency and the
quality of the straightening depend on design and operating
principle of the straightening tool. In the modern technique of
EMF a large number of the tools - inductor systems (IS) is used
in different configurations with uneven distribution forces on the
treatment object that in turn does not meet the needs of the
effective process of straightening. There appears the urgent
necessity to create IS with high uniformity of the induced field
and a high concentration of attracting forces in the working
area of the tool. The most effective IS are the Inductor Systems
with an Attracting Screen (ISAS). One of the most important
considerations when choosing a particular design ISAS is the
study of the electrodynamics processes with definition of excited
loads. The nature and the course of the electrodynamics
processes in accordance with design features determine the
effectiveness and the efficiency of the ISAS. Therefore, in ISAS
an additional coil for the concentration of the attracting forces
in the working area should be entered. Purpose. The numerical
analysis of the induced fields and the currents in the
experimental models of ISAS with an additional coil was made.
Methodology. In the idealization of the «extremely low»
frequencies of existing fields, there were received rated
dependences for density of the induced currents and distributed
attracting force in ISAS and the external additional coil,
through the use of the calculated model in the cylindrical
coordinate system. Results. Insertion of the additional coil
placed over the accessory screen allows to concentrate and
increase the amplitude of the attracting forces in the central
part of the working area of the inductor system. Practical value.
1. Numerical analysis of fields and currents in experimental
models of Induction Systems with Attracting Screen (ISAS) and
additional coil, designed to align the metal coatings of vehicles
was made. 2. It is shown that if in ISAS they insert additional
coil placed over the accessory screen significantly increases the
amplitude of excited forces of attraction. 3. It is shown that the
parallel connection of the primary and additional coils in ISAS
allows to concentrate the forces of attraction in the centre of the
working area of the tool for straightening automobile bodies.
2015-01-01T00:00:00Z