Перегляд за автором "Lytvynenko, V.V."

Сортувати за: Порядок: Результатів:

  • Donets, S.E.; Klepikov, V.F.; Lytvynenko, V.V.; Lonin, Yu.F.; Ponomarev, A.G.; Starovoytov, R.I.; Startsev, O.A.; Uvarov, V.T. (Вопросы атомной науки и техники, 2015)
    High-current electron beam irradiation has been applied for surface coating of copper with aluminum in ablative mode at the TEMP-A accelerator with energy of 350 keV, pulse length of 5 μs, and fluence 10…200 J/cm2. The ...
  • Myla, D.E.; Bryukhovetsky, V.V.; Lytvynenko, V.V.; Poyda, V.P.; Poyda, A.V.; Klepikov, V.F.; Uvarov, V.T.; Lonin, Yu.F.; Ponomarev, A.G. (Вопросы атомной науки и техники, 2020)
    The structural and phase changes in the surface layer of an aluminum alloy 1933 caused by the action of a relativistic pulsed electron beam are studied. The structural and phase state of this layer is determined by the ...
  • Prokhorenko, E.M.; Lytvynenko, V.V.; Zakharchenko, A.A.; Khazhmuradov, M.A.; Sokolov, S.A.; Prokhorenko, T.G.; Ben, A.P. (Вопросы атомной науки и техники, 2021)
    Polystyrene-metal composite materials were manufactured. Composite materials are made of polystyrene, which has been reinforced with highly dispersed powder-like aluminum. Tungsten or steel powder was applied as a radiation ...
  • Bazaleev, N.I.; Lytvynenko, V.V. (Вопросы атомной науки и техники, 2019)
    The methodical and physical bases of the use of active thermography as a high-performance non-destructive method of control and defectoscopy of materials during thermovision monitoring of technological equipment at NPP ...
  • Prohorenko, E.M.; Klepikov, V.F.; Lytvynenko, V.V.; Bazaleyev, N.I.; Magda, I.I.; Prohorenko, T.G.; Morozov, A.I. (Вопросы атомной науки и техники, 2018)
    The methods of IR-radiometric diagnostics of vacuum systems have been worked out. Several mechanisms are proposed that change the temperature field in the defect region. Depending on the type of defect, the main types of ...
  • Klepikov, V.F.; Prokhorenko, E.M.; Lytvynenko, V.V.; Zakharchenko, A.A.; Hazhmuradov, M.A. (Вопросы атомной науки и техники, 2016)
    Radiation safety features of polystyrene steel composite materials were found by means of mathematical modeling techniques. We determined the attenuation of the gamma quantum flux passing through a solid protective ...
  • Bazaleev, M.I.; Bryukhovetsky, V.V.; Donets, S.Ye.; Klepikov, V.F.; Lytvynenko, V.V.; Prokhorenko, E.M.; Startsev, O.A.; Lonin, Yu.F.; Ponomarev, A.G.; Uvarov, V.T. (Вопросы атомной науки и техники, 2019)
    Structural integrity of the gas turbine blades is of great concern. A set of methods and instruments is proposed to study the problems of the test loading of the industrial turbine blades. The approach aims to model the ...
  • Donets, S.E.; Lytvynenko, V.V.; Lonin, Yu.F.; Ponomarev, A.G.; Rokhmanov, N.Ya.; Starovoytov, R.I.; Uvarov, V.T. (Вопросы атомной науки и техники, 2018)
    The problems of the stability of molybdenum targets to the action of concentrated energy fluxes are considered. A series of irradiations of a molybdenum target with a high-current relativistic electron beam was carried ...
  • Manuilenko, O.V.; Prokhorenko, E.M.; Pavlii, K.V.; Zajtsev, B.V.; Dubniuk, S.N.; Lytvynenko, V.V.; Prokhorenko, T.G. (Вопросы атомной науки и техники, 2022)
    The change in the radiation characteristics of the surface of tungsten was studied. Helium ions beams with energies of 0.12 and 4 MeV were used. Curves of ionization and damage are got on length of free run of ions of ...
  • Klepikov, V.F.; Prokhorenko, E.M.; Lytvynenko, V.V.; Zakharchenko, A.A.; Hazhmuradov, M.A. (Вопросы атомной науки и техники, 2015)
    Composite materials, intended for radiation protection, were studied. They are made of polystyrene and reinforced by an aluminum. Aluminum is used as a powder. Tungsten powder was added for increase the radiation-protective ...
  • Klepikov, V.F.; Lytvynenko, V.V.; Lonin, Yu.F.; Ponomarev, A.G.; Tolstolutskiy, O.G.; Uvarov, V.V.; Uvarov, V.T. (Вопросы атомной науки и техники, 2009)
    The interaction of high-current REВ with the surface of solid targets was investigated. The target material was stainless steel 12Х18Н10Т, graphite, tungsten, plexiglas. The optical diagnostic methods were used to determine ...
  • Starovoytov, R.I.; Mihal, O.V.; Moroz, O.V.; Mazilin, B.A.; Donets, S.E.; Lytvynenko, V.V.; Lonin, Yu.F.; Ponomarev, А.G.; Uvarov, V.T. (Вопросы атомной науки и техники, 2018)
    The problem of the appearance of a relief on the surface of metals, which was modified by high-current relativistic electron beams, is considered. The technological promise of this modification is shown. The possibility of ...
  • Prohorenko, E.M.; Klepikov, V.F.; Lytvynenko, V.V.; Skrypnik, A.I.; Zaharchenko, A.A.; Khazhmuradov, M.A. (Вопросы атомной науки и техники, 2013)
    Offered an individual protective system designed for the needs of radiation-biological protection. As the protective layer is applied the polymeric matrix composite material based on aluminum reinforced polystyrene, with ...
  • Manuilenko, O.V.; Prokhorenko, E.M.; Pavlii, K.V.; Zajtsev, B.V.; Dubniuk, S.N.; Lytvynenko, V.V.; Kasatkin, Yu.A.; Prokhorenko, T.G. (Problems of Atomic Science and Technology, 2023)
    The samples of tungsten with a purity of 99.5 and 99.7% were irradiated with helium ion beams (EHe⁺ = 0.12 MeV). The total sputtering coefficients for the sample depth up to 60 Å from the surface of sample were obtained. ...
  • Lytvynenko, V.V.; Shmidko, I.N.; Rodionov, E.V. (Вопросы атомной науки и техники, 2017)
    This paper examines the infrared heating panels with thin conductivite layer. An oxide semiconductor thin film layer is proposed for improvements of the heating layer’s reliability and stability. Characteristics of the ...
  • Prokhorenko, E.M.; Klepikov, V.F.; Lytvynenko, V.V.; Zakharchenko, A.A.; Khazhmuradov, M.A. (Вопросы атомной науки и техники, 2014)
    In individual protective complete sets, for application as elements of radiation biological protection, five types of composition materials are offered. Their basis is polystyrene reinforced by an aluminum with addition ...
  • Myla, D.E.; Bryukhovetsky, V.V.; Lytvynenko, V.V.; Petrushenko, S.I.; Nevgasimov, O.O.; Lonin, Yu.F.; Ponomarev, A.G.; Uvarov, V.T. (Вопросы атомной науки и техники, 2022)
    The processing of the AA6111-T4 aluminum alloy by the high-current relativistic electron beams affects the forming of the surface layer with a modified structure and phase state. The depth of the modified surface layer ...
  • Donets, S.Ye.; Klepikov, V.F.; Lytvynenko, V.V.; Prokhorenko, E.M.; Startsev, O.A.; Lonin, Yu.F.; Ponomarev, A.G.; Uvarov, V.T.; Starovoytov, R.I. (Вопросы атомной науки и техники, 2019)
    Titanium VT22 alloy was irradiated in the TEMP-A accelerator with the high current electron beam with the energy of 350 keV, beam current of 2 kA, pulse length around 4 µs, and beam diameter of 45 mm. The irradiation was ...
  • Prokhorenko, E.M.; Lytvynenko, V.V.; Melyakovа, O.А.; Lonin, Yu.F.; Ponomarev, A.G.; Uvarov, V.T.; Shul'gin, N.A.; Prokhorenko, T.G. (Вопросы атомной науки и техники, 2020)
    The steel surface (ХГС) was irradiated with a high-current electron beam. A high-current electron beam was obtained in the TEMP-A accelerator. Steel samples were made from drum mill balls. The balls had varying degrees of ...
  • Donets, S.E.; Lytvynenko, V.V.; Klepikov, V.F.; Lonin, Yu.F.; Ponomarev, A.G.; Selivanov, S.Ye.; Starovoytov, R.I.; Uvarov, V.T. (Вопросы атомной науки и техники, 2020)
    The paper discusses the problem of increasing the performance properties of aluminum alloy D16 for possible more efficient use in the fields of transport engineering. A property modification tool is a high current relativistic ...