Перегляд за назвою

Сортувати за: Порядок: Результатів:

  • Structure and mechanical properties of nitride multilayer systems on the basis of high entropy alloys and transition metals of group VI 
    Nyemchenko, U.S.; Beresnev, V.M.; Sobol, O.V.; Lytovchenko, S.V.; Stolbovoy, V.A.; Novikov, V.Ju.; Meylekhov, А.А.; Postelnyk, А.А.; Kovaleva, M.G. (Вопросы атомной науки и техники, 2016)
    The influence of technological parameters of obtaining on the possibilities of structural engineering and mechanical properties of multi-layer compositions of the layers of nitrides of high entropy alloy Ti-Zr-Nb-Ta-Hf and ...
  • Structure and mechanical properties of the refractory multicomponent alloys of the Ta-Ti-V-Zr-Al system 
    Levenets, A.; Tikhonovsky, M.; Velikodnyi, O.; Rostova, G.; Klimenko, I.; Tolstolutska, G. (Вопросы атомной науки и техники, 2022)
    Refractory high-entropy alloys of the Ta-Ti-V-Zr-Al system, in which the V and Ta contents were varied, were investigated. Criteria, based on the thermodynamic parameters of the binary alloys, melting temperatures of the ...
  • Structure and mechanical stresses in TaSi₂/Si multilayer 
    Devizenko, A.Yu.; Kopylets, I.A.; Kondratenko, V.V.; Pershyn, Y.P.; Devizenko, I.Y.; Zubarev, E.N.; Savitskiy, B.A. (Functional Materials, 2018)
    The structure, construction and mechanical stresses of the TaSi₂/Si multilayer manufactured by magnetron sputtering on the heated substrates were studied in the initial state and after thermal annealing. Deposition of ...
  • Structure and microhardness of low pressure polymerized fullerite C₆₀ 
    Isakina, A.P.; Lubenets, S.V.; Natsik, V.D.; Prokhvatilov, A.I.; Strzhemechny, M.A.; Fomenko, L.S.; Aksenova, N.A.; Soldatov, A.V. (Физика низких температур, 1998)
    We have carried out low-temperature x-ray diffraction studies on C₆₀ fullerite polymerized by low quasi-hydrostatic pressure of 1.1 GPa at T = 563 K. It is established that at room temperature in freshly prepared samples ...
  • Structure and modes of dc glow discharge in nitrogen with hollow cathode or anode 
    Lisovskiy, V.A.; Osmayev, R.O.; Khilko, D.I.; Yegorenkov, V.D. (Вопросы атомной науки и техники, 2018)
    This paper studies the modes of burning and structure of the glow discharge with "hollow cathode and flat anode" and "hollow anode and flat cathode" in nitrogen. We have demonstrated that a higher discharge current is ...
  • Structure and optical properties of AlN films obtained using the cathodic arc plasma deposition technique 
    Shapovalov, A.P.; Korotash, I.V.; Rudenko, E.M.; Sizov, F.F.; Dubyna, D.S.; Osipov, L.S.; Polotskiy, D.Yu.; Tsybri, Z.F.; Korchovyi, A.A. (Semiconductor Physics Quantum Electronics & Optoelectronics, 2015)
    Aluminum nitride (AlN) film coatings have been obtained by a new technique of hybrid helikon-arc ion-plasma deposition. Possibility to combine the magnetic-filtered arc plasma deposition technique with a treatment in RF ...
  • Structure and optical properties of AlN films obtained using the cathodic arc plasma deposition technique 
    Shapovalov, A.P.; Korotash, I.V.; Rudenko, E.M.; Sizov, F.F.; Dubyna, D.S.; Osipov, L.S.; Polotskiy, D.Yu.; Tsybrii, Z.F.; Korchovyi, A.A. (Semiconductor Physics Quantum Electronics & Optoelectronics, 2015)
    Aluminum nitride (AlN) film coatings have been obtained by a new technique of hybrid helikon-arc ion-plasma deposition. Possibility to combine the magnetic-filtered arc plasma deposition technique with a treatment in RF ...
  • Structure and optical properties of CdS polycrystalline layers for solar cells based on CdS/CdTe 
    Khrypunov, G.S.; Kopach, G.I.; Dobrozhan, A.I.; Mygushchenko, R.P.; Kropachek, O.V.; Lyubov, V.M. (Functional Materials, 2019)
    Thin CdS films about 200-500 nm thick with stable hexagonal modification with 85-80 % transparency value respectively in the visible and infrared spectrum regions were investigated. The use of the FTO sublayer to obtain ...
  • Structure and phase transition peculiarities in solid nitrous oxide and attempts at their explaination 
    Drobyshev, A.; Aldiyarov, A.; Korshikov, E.; Kurnosov, V.; Sokolov, D.; Tokmoldin, N. (Физика низких температур, 2013)
    Cryogenic vacuum deposited films of nitrous oxide were studied at the following conditions: a mirror-like silver-coated copper substrate; deposition temperature 16 K; gas phase pressure during deposition 10⁻³ Pa. Anal-ysis ...
  • Structure and photoluminescence of helium-intercalated fullerite C₆₀ 
    Legchenkova, I.V.; Prokhvatilov, A.I.; Stetsenko, Yu.E.; Strzhemechny, M.A.; Yagotintsev, K.A.; Avdeenko, A.A.; Eremenko, V.V.; Zinoviev, P.V.; Zoryansky, V.N.; Silaeva, N.B.; Ruoff, R.S. (Физика низких температур, 2002)
    Intercalation of C₆₀ single crystals with helium was studied by powder x-ray diffractometry. It was established that the intercalation is a two-stage process, octahedral cavities are filled first and then tetrahedral ones, ...
  • Structure and physical characteristics of ohmic contacts based on Fe and Ge films 
    Vlasenko, О.V.; Odnodvorets, L.V.; Protsenko, I.Yu. (Вопросы атомной науки и техники, 2014)
    Предложено применение метода послойной конденсации с последующим отжигом от 300 до 900 К для формирования омических контактов на основе пленок Fe и Ge. Проведены исследования микроструктуры и фазового состава контактных ...
  • Structure and properties of austenitic ODS steel 08Cr18Ni10Ti 
    Velikodnyi, A.N.; Voyevodin, V.N.; Tiкhonovsky, M.A.; Bryk, V.V.; Kalchenko, A.S.; Starostenko, S.V.; Kolodiy, I.V.; Okovit, V.S.; Bovda, A.М.; Onischenko, L.V.; Storogilov, G.Ye. (Вопросы атомной науки и техники, 2014)
    Using mechanical alloying, experimental samples of austenitic stainless steel 08Cr18Ni10Ti dispersion hardening nano systems Y₂O₃-ZrO₂ different composition. The microstructure of samples at various stages of preparation, ...
  • Structure and properties of coatings based on FeCrAl and Cr18Ni10T 
    Belous, V.А.; Bortnitskaya, М.A.; Vasilenko, R.L.; Voyevodin, V.N.; Klimenko, І.О.; Kovalenko, V.І.; Kolodiy, І.V.; Kuprin, A.S.; Marinin, V.G.; Ovcharenko, V.D.; Tikhonovsky, М.А. (Вопросы атомной науки и техники, 2020)
    The process of vacuum-arc deposition of protective coatings from multicomponent FeCrAl cathodes and 18Cr10NiT stainless steel onto fragments of Zr1Nb alloy claddings has been developed. The influence of the reaction ...
  • Structure and properties of electrolytic cobalt-tungsten alloy coatings 
    Ved, M.; Sakhnenko, N.; Bairachnaya, T.; Tkachenko, N. (Functional Materials, 2008)
    Electrochemical synthesis mode influence on composition, structure, surface morphology and functional properties of cobalt-tungsten alloy coatings has been investigated. The high-melting element concentration range in the ...
  • Structure and properties of Fe-B-C powders alloyed with Cr, V, Mo or Nb for plasma-sprayed coatings 
    Sukhova, O.V. (Вопросы атомной науки и техники, 2020)
    In the present study, the microstructure development and properties of the starting Fe-B-C powders for plasma spraying fabricated by dispersing a consumable rotating rod were investigated as functions of alloying elements ...
  • Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation 
    Vasilenko, R.L.; Voyevodin, V.N.; Belous, V.А.; Bortnitskaya, М.A.; Kolodiy, І.V.; Klimenko, І.О.; Ovcharenko, V.D.; Kovalenko, V.І.; Marinin, V.G.; Ilchenko, A.V.; Tikhonovsky, М.А.; Kuprin, A.S. (Вопросы атомной науки и техники, 2021)
    Protective coatings with different compositions of Fe, Cr, and Al were deposited by cathodic arc evaporation method on fragments of Zr1Nb alloy fuel claddings. The influence of the composition and structural state of the ...
  • Structure and properties of glow discharge in argon with hollow cathode 
    Lisovskiy, V.A.; Osmayev, R.O.; Khilko, D.I.; Yegorenkov, V.D. (Вопросы атомной науки и техники, 2019)
    This paper deals with studying into the modes of burning and structure of the glow discharge with a hollow cathode and a flat anode in argon. We have demonstrated that the electron beam usually leaving the cathode cavity ...
  • Structure and properties of Mg, Al, Ti oxide and nitride layers formed by ion-plasma sputtering 
    Pidkova, V.; Brodnikovska, I.; Duriagina, Z.; Petrovskyy, V. (Functional Materials, 2014-12-12)
    Dielectric layers of Al₂O₃, MgO, AlN and TiO₂ were formed by using ion-plasma sputtering method. Their microstructure and electrophysical properties in the range of 20 - 400°C were investigated. The conductivity mechanism, ...
  • Structure and properties of powder gas-plasma coatings based on nickel 
    Hlushkova, D.B.; Bagrov, V.A.; Demchenko, S.V.; Volchuk, V.M.; Kalinin, O.V.; Kalinina, N.E. (Вопросы атомной науки и техники, 2022)
    The development of modern technology requires a constant increase in reliability and durability of products. Widely used in the practice of domestic and foreign engineering coatings from electrolytic chromium for several ...
  • Structure and properties of solid BK6-OM alloy after electrosintering 
    Prokopiv, N.M.; Gevorkyan, E.S.; Vovk, R.V.; Harchenko, O.V.; Chishkala, V.A. (Functional Materials, 2018)
    In the paper we describe the results of the structure formation and physicomechanical properties of WC-Co hard alloy from he standard especially fine-grained BK6-OM mixture of KZTS (Russia) in electrosintering (ES) process ...